Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an Arduino UNO microcontroller and a TCS3200 color sensor. The Arduino UNO is used to control the TCS3200 sensor and read its output. The connections between the components are specified, and the code running on the Arduino UNO is documented.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

TCS3200

• Description: A color sensor that can detect and measure the intensity of red, green, and blue light.
• Pins: GND, OUT, S2, S3, VCC, LED, S0, S1

Wiring Details

Arduino UNO

• 5V: Connected to TCS3200 VCC
• GND: Connected to TCS3200 GND
• D8: Connected to TCS3200 OUT
• D7: Connected to TCS3200 S2
• D6: Connected to TCS3200 S3
• D5: Connected to TCS3200 S0
• D4: Connected to TCS3200 S1

TCS3200

• VCC: Connected to Arduino UNO 5V
• GND: Connected to Arduino UNO GND
• OUT: Connected to Arduino UNO D8
• S2: Connected to Arduino UNO D7
• S3: Connected to Arduino UNO D6
• S0: Connected to Arduino UNO D5
• S1: Connected to Arduino UNO D4

Code Documentation

Arduino UNO Code

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

This code is a basic template for the Arduino UNO. The setup() function is where you initialize your settings, and the loop() function is where the main code runs repeatedly. You can add your specific code to interact with the TCS3200 sensor in these functions.