Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an Arduino UNO microcontroller and a MAX30205 temperature sensor. The Arduino UNO is used to interface with the MAX30205 sensor to read temperature data. The connections between the components are described, and the code running on the Arduino UNO is documented.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

MAX30205

• Description: A digital temperature sensor.
• Pins: VCC, GND, SDA, SCL, OS, A0, A1, A2

Wiring Details

Arduino UNO

• 3.3V: Connected to VCC of MAX30205
• GND: Connected to GND, A0, A1, and A2 of MAX30205
• A4: Connected to SDA of MAX30205
• A5: Connected to SCL of MAX30205

MAX30205

• VCC: Connected to 3.3V of Arduino UNO
• GND: Connected to GND of Arduino UNO
• SDA: Connected to A4 of Arduino UNO
• SCL: Connected to A5 of Arduino UNO
• A0: Connected to GND of Arduino UNO
• A1: Connected to GND of Arduino UNO
• A2: Connected to GND of Arduino UNO

Code Documentation

Arduino UNO Code

sketch.ino

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

documentation.txt

This document provides a comprehensive overview of the circuit, including the components used, their connections, and the code running on the Arduino UNO.