Circuit Documentation

Summary

This circuit consists of an Arduino UNO microcontroller, a Square Force Sensitive Resistor (FSR), and a buzzer. The FSR is used to detect pressure, and the buzzer is used to produce sound based on the input from the FSR.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

Square FSR

• Description: A force-sensitive resistor that changes its resistance based on the pressure applied to its surface.
• Pins: A0, A1

Buzzer

• Description: An electronic device that produces sound.
• Pins: PIN, GND

Wiring Details

Arduino UNO

• GND: Connected to GND of Square FSR and GND of Buzzer
• A0: Connected to A0 of Square FSR
• D13: Connected to PIN of Buzzer

Square FSR

• A0: Connected to A0 of Arduino UNO
• A1: Connected to GND of Arduino UNO

Buzzer

• PIN: Connected to D13 of Arduino UNO
• GND: Connected to GND of Arduino UNO

Code Documentation

Arduino UNO Code

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Additional Documentation

This documentation provides a comprehensive overview of the circuit, including a summary, detailed component list, wiring details, and the code used in the Arduino UNO microcontroller.