Circuit Documentation

Summary

This circuit consists of a power supply, two resistors, two single-pole single-throw (SPST) rocker switches, and a green LED. The circuit is designed to control the LED using the rocker switches, with resistors to limit the current.

Component List

1. Resistor (220 Ohms)

   • Pins: pin1, pin2
   • Description: Limits the current in the circuit.
   • Properties:
     • Resistance: 220 Ohms

2. Resistor (1000 Ohms)

   • Pins: pin1, pin2
   • Description: Limits the current in the circuit.
   • Properties:
     • Resistance: 1000 Ohms

3. Rocker Switch (SPST)

   • Pins: 1, 2
   • Description: Single-pole single-throw switch to control the circuit.

4. Rocker Switch (SPST)

   • Pins: 1, 2
   • Description: Single-pole single-throw switch to control the circuit.

5. LED: Two Pin (green)

   • Pins: cathode, anode
   • Description: Green LED to indicate the circuit status.

6. 2.1mm DC Barrel Jack

   • Pins: switch, sleeve, center
   • Description: Power supply input for the circuit.

Wiring Details

Resistor (220 Ohms)

• pin1 is connected to:

  • pin2 of the 1000 Ohms Resistor
  • pin1 of the 1000 Ohms Resistor
  • pin2 of the first Rocker Switch (SPST)
  • center pin of the 2.1mm DC Barrel Jack

• pin2 is connected to:

  • pin2 of the second Rocker Switch (SPST)

---

Resistor (1000 Ohms)

• pin1 is connected to:

  • pin1 of the 220 Ohms Resistor
  • pin1 of the first Rocker Switch (SPST)
  • pin1 of the second Rocker Switch (SPST)
  • cathode of the green LED

• pin2 is connected to:

  • pin1 of the 220 Ohms Resistor

---

Rocker Switch (SPST)

• 1 is connected to:

  • pin1 of the 1000 Ohms Resistor
  • pin1 of the second Rocker Switch (SPST)
  • cathode of the green LED

• 2 is connected to:

  • pin1 of the 220 Ohms Resistor
  • center pin of the 2.1mm DC Barrel Jack

---

Rocker Switch (SPST)

• 1 is connected to:

  • pin1 of the 1000 Ohms Resistor
  • pin1 of the first Rocker Switch (SPST)
  • cathode of the green LED

• 2 is connected to:

  • pin2 of the 220 Ohms Resistor

---

LED: Two Pin (green)

• cathode is connected to:

  • pin1 of the 1000 Ohms Resistor
  • pin1 of the first Rocker Switch (SPST)
  • pin1 of the second Rocker Switch (SPST)

• anode is connected to:

  • sleeve of the 2.1mm DC Barrel Jack

---

2.1mm DC Barrel Jack

• switch is not connected.

• sleeve is connected to:

  • anode of the green LED

• center is connected to:

  • pin1 of the 220 Ohms Resistor
  • pin2 of the first Rocker Switch (SPST)

---

Code

There is no microcontroller code associated with this circuit.