Circuit Documentation
Summary
The circuit described in the provided inputs is a simple power distribution system designed to supply power to two DC gearmotors from a 6V battery pack. The battery pack consists of four AA batteries connected in series. There are no microcontrollers or complex electronics involved in this circuit, making it straightforward and easy to understand. The primary purpose of this circuit is to provide electrical power to the gearmotors, which could be part of a small robotic vehicle or a similar application.
Component List
Battery AAx4 6V
- Description: A battery pack consisting of four AA batteries connected in series to provide a total of 6V.
- Pins: VCC, GND
Gearmotor DC Wheels Right
- Description: A DC gearmotor used to drive the right wheel of a vehicle.
- Pins: PIN1, PIN2
Gearmotor DC Wheels Left
- Description: A DC gearmotor used to drive the left wheel of a vehicle.
- Pins: PIN1, PIN2
Wiring Details
Battery AAx4 6V
- VCC: Connected to PIN1 of both the Gearmotor DC Wheels Right and Gearmotor DC Wheels Left.
- GND: Connected to PIN2 of both the Gearmotor DC Wheels Right and Gearmotor DC Wheels Left.
Gearmotor DC Wheels Right
- PIN1: Connected to VCC of the Battery AAx4 6V.
- PIN2: Connected to GND of the Battery AAx4 6V.
Gearmotor DC Wheels Left
- PIN1: Connected to VCC of the Battery AAx4 6V.
- PIN2: Connected to GND of the Battery AAx4 6V.
Documented Code
No code has been provided for any microcontrollers in this circuit. This section is not applicable as the circuit does not include any programmable components or embedded code.