Circuit Documentation

Summary

This circuit integrates an Arduino UNO microcontroller with a bioamplifier (bioampexgpill), an LED, and three alligator clip cables. The bioampexgpill is used to capture bioelectrical signals, which are then fed into the Arduino for processing. The LED serves as an indicator, and the alligator clips are used to connect the bioampexgpill to external electrodes.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0-A5, SCL, SDA, AREF, D0-D13.

bioampexgpill

• Description: A bioamplifier designed to read bioelectrical signals.
• Pins: VCC, out, GND, Electrode 1, electrode2, electrode3.

Alligator Clip Cable (Yellow)

• Description: A cable with an alligator clip used for making temporary electrical connections.
• Pins: Pin, Alligator.

Alligator Clip Cable (Blue)

• Description: A cable with an alligator clip used for making temporary electrical connections.
• Pins: Pin, Alligator.

Alligator Clip Cable (Red)

• Description: A cable with an alligator clip used for making temporary electrical connections.
• Pins: Pin, Alligator.

LED: Two Pin (Green)

• Description: A green LED used as an indicator light.
• Pins: cathode, anode.

Comment

• Description: A placeholder for comments within the circuit design.

Wiring Details

Arduino UNO

• 5V connected to bioampexgpill VCC.
• A0 connected to bioampexgpill out.
• GND connected to bioampexgpill GND and LED cathode.
• D7 connected to LED anode.

bioampexgpill

• VCC connected to Arduino UNO 5V.
• out connected to Arduino UNO A0.
• GND connected to Arduino UNO GND.
• Electrode 1 connected to Yellow Alligator Clip Pin.
• electrode2 connected to Blue Alligator Clip Pin.
• electrode3 connected to Red Alligator Clip Pin.

Alligator Clip Cable (Yellow)

• Pin connected to bioampexgpill Electrode 1.
• Alligator free for external connection.

Alligator Clip Cable (Blue)

• Pin connected to bioampexgpill electrode2.
• Alligator free for external connection.

Alligator Clip Cable (Red)

• Pin connected to bioampexgpill electrode3.
• Alligator free for external connection.

LED: Two Pin (Green)

• cathode connected to Arduino UNO GND.
• anode connected to Arduino UNO D7.

Documented Code

Arduino UNO Code (sketch.ino)

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Additional Documentation (documentation.txt)

No additional code provided.

---

This documentation provides an overview of the circuit, including the purpose and connection details of each component, as well as the initial code for the Arduino UNO microcontroller. Further development of the code is required to implement the desired functionality of the circuit.