Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an Arduino UNO microcontroller, an OLED 1.3" display, and a GPS NEO 6M module. The document covers the components used, their wiring details, and the embedded code for the microcontroller.

Component List

Arduino UNO

• Description: A popular microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

OLED 1.3"

• Description: A 1.3-inch OLED display module.
• Pins: GND, VCC, SCL, SDA

GPS NEO 6M

• Description: A GPS module for receiving satellite navigation signals.
• Pins: VCC, RX, TX, GND

Wiring Details

Arduino UNO to OLED 1.3"

• GND (OLED) to GND (Arduino UNO)
• VCC (OLED) to 3.3V (Arduino UNO)
• SCL (OLED) to A5 (Arduino UNO)
• SDA (OLED) to A4 (Arduino UNO)

Arduino UNO to GPS NEO 6M

• VCC (GPS) to 5V (Arduino UNO)
• RX (GPS) to D3 (Arduino UNO)
• TX (GPS) to D2 (Arduino UNO)
• GND (GPS) to GND (Arduino UNO)

Documented Code

Arduino UNO Code

sketch.ino

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

documentation.txt

This concludes the documentation for the circuit. The provided information includes a summary, detailed component list, wiring details, and the embedded code for the Arduino UNO microcontroller.