Circuit Documentation

Summary

This circuit consists of two DC motors, a rocker switch, a pushbutton, and a 2x 18650 battery pack. The circuit is designed to control the motors using the switch and the pushbutton. The battery pack provides the necessary power for the motors and the control components.

Component List

DC Motor

• Description: A DC motor that converts electrical energy into mechanical motion.
• Pins: pin 1, pin 2

Rocker Switch

• Description: A switch that can toggle between two states, allowing or interrupting the flow of current.
• Pins: 1, 2

Pushbutton

• Description: A momentary switch that allows current to flow only when pressed.
• Pins: Pin 1, Pin 2, Pin 3, Pin 4

2x 18650 Battery Pack

• Description: A battery pack consisting of two 18650 lithium-ion cells, providing power to the circuit.
• Pins: vcc, gnd

Wiring Details

DC Motor 1

• Pin 1: Connected to Pin 1 of the Pushbutton
• Pin 2: Connected to Pin 2 of the second DC Motor and gnd of the 2x 18650 Battery Pack

DC Motor 2

• Pin 1: Connected to Pin 2 of the Rocker Switch
• Pin 2: Connected to Pin 2 of the first DC Motor and gnd of the 2x 18650 Battery Pack

Rocker Switch

• Pin 1: Connected to Pin 4 of the Pushbutton
• Pin 2: Connected to Pin 1 of the second DC Motor

Pushbutton

• Pin 1: Connected to Pin 1 of the first DC Motor
• Pin 2: Connected to vcc of the 2x 18650 Battery Pack
• Pin 3: Not connected
• Pin 4: Connected to Pin 1 of the Rocker Switch

2x 18650 Battery Pack

• vcc: Connected to Pin 2 of the Pushbutton
• gnd: Connected to Pin 2 of both DC Motors

Code

There is no code associated with this circuit.