Cirkit Designer LogoCirkit DesignerYour all-in-one circuit design IDE Launch Cirkit Designer App

Battery-Powered ESP32 Weather Station with Temperature and Humidity Sensors

View and Edit Project In Cirkit DesignerImage of Battery-Powered ESP32 Weather Station with Temperature and Humidity Sensors

Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an ESP32 microcontroller, a 18650 Li-ion Battery, a DHT22 temperature and humidity sensor, a generic temperature sensor, and a 10k Ohm resistor. The circuit is designed to measure temperature and humidity and is powered by a 18650 Li-ion battery.

Component List

  1. 18650 Li-ion Battery

    • Description: Rechargeable lithium-ion battery.
    • Pins: +, -
  2. ESP32

    • Description: A low-cost, low-power system on a chip microcontroller with integrated Wi-Fi and dual-mode Bluetooth.
    • Pins: EN, VP, VN, D34, D35, D32, D33, D25, D26, D27, D14, D12, D13, GND, VIN, 3V3, D15, D2, D4, RX2, TX2, D5, D18, D19, D21, RX0, TX0, D22, D23, BOOT
  3. Temperature Sensor

    • Description: Generic temperature sensor.
    • Pins: Temp GND Black, Temp VDD Red, Temp DQ Data Yellow
  4. DHT22

    • Description: Temperature and humidity sensor.
    • Pins: +, Out, -
  5. Resistor

    • Description: 10k Ohm resistor.
    • Pins: pin1, pin2
    • Properties: Resistance: 10k Ohms

Wiring Details

18650 Li-ion Battery

ESP32

Temperature Sensor

DHT22

Resistor

Code

No code is provided for this circuit.


This document provides a comprehensive overview of the circuit, including a summary, detailed component list, wiring details, and code documentation.