Circuit Documentation

Summary

This document provides a detailed overview of a simple circuit involving an Arduino UNO microcontroller and a capacitive touch sensor. The touch sensor is connected to the Arduino to detect touch inputs and can be used for various interactive applications.

Component List

Arduino UNO

• Description: A popular microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

Sensor Touch Capacitivo

• Description: A capacitive touch sensor used to detect touch inputs.
• Pins: OUT, VCC, GND

Wiring Details

Arduino UNO

• 5V: Connected to VCC of the Sensor Touch Capacitivo
• GND: Connected to GND of the Sensor Touch Capacitivo
• D10: Connected to OUT of the Sensor Touch Capacitivo

Sensor Touch Capacitivo

• VCC: Connected to 5V of the Arduino UNO
• GND: Connected to GND of the Arduino UNO
• OUT: Connected to D10 of the Arduino UNO

Documented Code

Arduino UNO Code

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

This code is a basic template for the Arduino UNO. The setup() function is where you initialize your settings, and the loop() function is where the main code runs repeatedly. You can add your touch sensor logic in these functions to create interactive applications.