Circuit Documentation

Summary

This circuit consists of two Arduino UNO microcontrollers interconnected through their analog pins. The circuit is designed to demonstrate basic microcontroller communication and setup.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

Wiring Details

Arduino UNO

• A4 is connected to A4 of the other Arduino UNO.
• A5 is connected to A5 of the other Arduino UNO.
• UNUSED, IOREF, Reset, and 3.3V are interconnected with the corresponding pins of the other Arduino UNO.
• GND, Vin, A0, and A1 are interconnected with the corresponding pins of the other Arduino UNO.

Arduino UNO

• A4 is connected to A4 of the other Arduino UNO.
• A5 is connected to A5 of the other Arduino UNO.
• UNUSED, IOREF, Reset, and 3.3V are interconnected with the corresponding pins of the other Arduino UNO.
• GND, Vin, A0, and A1 are interconnected with the corresponding pins of the other Arduino UNO.

Code Documentation

Arduino UNO 1

sketch.ino

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

documentation.txt

Arduino UNO 2

sketch.ino

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

documentation.txt