Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an LED, a thermal switch, a power source, a rocker switch, a heater element, and a resistor. The circuit is designed to control the heating element using a thermal switch and a rocker switch, with an LED indicator.

Component List

1. LED: Two Pin (red)

   • Pins: cathode, anode
   • Description: A red LED used as an indicator.
   • Purpose in Circuit: Indicates the status of the circuit.

2. Kettle Thermal Switch

   • Pins: None
   • Description: A thermal switch used to control the heater element.
   • Purpose in Circuit: Controls the heater element based on temperature.

3. Power 220V

   • Pins: hot wire, neutral wire
   • Description: A 220V power source.
   • Purpose in Circuit: Provides power to the circuit.

4. Rocker Switch

   • Pins: output, input
   • Description: A switch used to control the power to the heater element.
   • Purpose in Circuit: Turns the heater element on and off.

5. Heater Element

   • Pins: VCC, GND
   • Description: A heating element.
   • Purpose in Circuit: Heats up when powered.

6. Resistor

   • Pins: pin1, pin2
   • Description: A resistor with a resistance of 6000 Ohms.
   • Purpose in Circuit: Limits the current to the LED.

7. Comment

   • Pins: None
   • Description: A comment component for documentation purposes.
   • Purpose in Circuit: Not applicable.

Wiring Details

LED: Two Pin (red)

• Cathode: Connected to pin2 of the Resistor.
• Anode: Connected to the hot wire of the Power 220V and VCC of the Heater Element.

Kettle Thermal Switch

• Pin: Connected to the output of the Rocker Switch and GND of the Heater Element and pin1 of the Resistor.

Power 220V

• Hot Wire: Connected to the anode of the LED and VCC of the Heater Element.
• Neutral Wire: Connected to the input of the Rocker Switch.

Rocker Switch

• Output: Connected to the Kettle Thermal Switch.
• Input: Connected to the neutral wire of the Power 220V.

Heater Element

• VCC: Connected to the hot wire of the Power 220V and anode of the LED.
• GND: Connected to the Kettle Thermal Switch and pin1 of the Resistor.

Resistor

• Pin1: Connected to the Kettle Thermal Switch and GND of the Heater Element.
• Pin2: Connected to the cathode of the LED.

Code

There is no code associated with this circuit.

---

This document provides a comprehensive overview of the circuit, including a summary, component list, wiring details, and code documentation.