Circuit Documentation

Summary

This circuit involves an Arduino UNO microcontroller, a Hall Sensor, and a red LED. The Arduino UNO provides power and control signals to the Hall Sensor and the LED. The Hall Sensor detects magnetic fields and sends a signal to the Arduino, which can then control the LED based on the sensor's input.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

LED: Two Pin (red)

• Description: A red light-emitting diode.
• Pins: cathode, anode

Hall Sensor

• Description: A sensor that detects magnetic fields.
• Pins: -, +, S

Wiring Details

Arduino UNO

• 5V: Connected to Hall Sensor (+)
• GND: Connected to Hall Sensor (-) and LED (cathode)
• D13: Connected to LED (anode)
• D2: Connected to Hall Sensor (S)

LED: Two Pin (red)

• cathode: Connected to Arduino UNO (GND)
• anode: Connected to Arduino UNO (D13)

Hall Sensor

• -: Connected to Arduino UNO (GND)
• +: Connected to Arduino UNO (5V)
• S: Connected to Arduino UNO (D2)

Code

Arduino UNO Code (sketch.ino)

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Documentation (documentation.txt)

This documentation provides a comprehensive overview of the circuit, including a summary, detailed component descriptions, wiring details, and the code used in the microcontroller.