Circuit Documentation

Summary

This document provides a detailed overview of a circuit design, including a list of components, their descriptions, wiring details, and any embedded code used in the circuit. The circuit includes various resistors, LEDs, capacitors, transistors, a voltage regulator, a comparator, a MOSFET, and a DC barrel jack.

Component List

Resistor

• Description: A passive electrical component that implements electrical resistance as a circuit element.
• Pins: pin1, pin2
• Properties:
  • Resistance: 1000 Ohms
  • Resistance: 200 Ohms
  • Resistance: 3300 Ohms

LED: Two Pin (red)

• Description: A light-emitting diode that emits red light.
• Pins: cathode, anode

Ceramic Capacitor

• Description: A capacitor with a ceramic dielectric.
• Pins: pin0, pin1
• Properties:
  • Capacitance: 0.0000001 Farads

LED: Two Pin (green)

• Description: A light-emitting diode that emits green light.
• Pins: cathode, anode

IRFZ44N

• Description: A type of N-channel MOSFET.
• Pins: Gate, Drain, Source

BC547 Transistor

• Description: A general-purpose NPN bipolar junction transistor.
• Pins: Collector, Base, Emitter

LM311

• Description: A voltage comparator.
• Pins: GND, -INP, +INP, VEE, B, BS, OUT, VCC

2.1mm DC Barrel Jack

• Description: A DC power connector.
• Pins: switch, sleeve, center

LM317 Voltage Regulator

• Description: An adjustable voltage regulator.
• Pins: Adj, V_out, V_in

Super Capacitor

• Description: A high-capacity capacitor with capacitance values much higher than other capacitors.
• Pins: pos, neg

Wiring Details

LM317 Voltage Regulator

• Pin V_in is connected to:

  • Resistor pin1 (1000 Ohms)
  • Resistor pin1 (200 Ohms)
  • 2.1mm DC Barrel Jack center

• Pin V_out is connected to:

  • Resistor pin2 (1000 Ohms)
  • Ceramic Capacitor pin0
  • Resistor pin2 (3300 Ohms)
  • IRFZ44N Drain

• Pin Adj is connected to:

  • Resistor pin1 (1000 Ohms)

Resistor (1000 Ohms)

• Pin pin1 is connected to:

  • LM317 Voltage Regulator V_in
  • Resistor pin1 (200 Ohms)
  • 2.1mm DC Barrel Jack center

• Pin pin2 is connected to:

  • LED: Two Pin (red) cathode

Resistor (200 Ohms)

• Pin pin1 is connected to:

  • LM317 Voltage Regulator V_in
  • Resistor pin1 (1000 Ohms)
  • 2.1mm DC Barrel Jack center

• Pin pin2 is connected to:

  • LM311 -INP
  • Resistor pin2 (200 Ohms)

Resistor (3300 Ohms)

• Pin pin1 is connected to:

  • Ceramic Capacitor pin1
  • LM311 GND
  • LM311 VCC
  • 2.1mm DC Barrel Jack sleeve
  • LED: Two Pin (red) anode

• Pin pin2 is connected to:

  • LM317 Voltage Regulator V_out
  • Ceramic Capacitor pin0
  • IRFZ44N Drain

LED: Two Pin (red)

• Pin cathode is connected to:

  • Resistor pin2 (1000 Ohms)

• Pin anode is connected to:

  • Ceramic Capacitor pin1
  • LM311 GND
  • LM311 VCC
  • Resistor pin1 (3300 Ohms)
  • 2.1mm DC Barrel Jack sleeve

Ceramic Capacitor

• Pin pin0 is connected to:

  • LM317 Voltage Regulator V_out
  • Resistor pin2 (3300 Ohms)
  • IRFZ44N Drain

• Pin pin1 is connected to:

  • LM311 GND
  • LM311 VCC
  • Resistor pin1 (3300 Ohms)
  • 2.1mm DC Barrel Jack sleeve
  • LED: Two Pin (red) anode

IRFZ44N

• Pin Drain is connected to:
  • LM317 Voltage Regulator V_out
  • Resistor pin2 (3300 Ohms)
  • Ceramic Capacitor pin0

LM311

• Pin GND is connected to:

  • Ceramic Capacitor pin1
  • LM311 VCC
  • Resistor pin1 (3300 Ohms)
  • 2.1mm DC Barrel Jack sleeve
  • LED: Two Pin (red) anode

• Pin -INP is connected to:

  • Resistor pin1 (200 Ohms)
  • Resistor pin2 (200 Ohms)

• Pin VCC is connected to:

  • Ceramic Capacitor pin1
  • LM311 GND
  • Resistor pin1 (3300 Ohms)
  • 2.1mm DC Barrel Jack sleeve
  • LED: Two Pin (red) anode

2.1mm DC Barrel Jack

• Pin center is connected to:

  • LM317 Voltage Regulator V_in
  • Resistor pin1 (1000 Ohms)
  • Resistor pin1 (200 Ohms)

• Pin sleeve is connected to:

  • Ceramic Capacitor pin1
  • LM311 GND
  • LM311 VCC
  • Resistor pin1 (3300 Ohms)
  • LED: Two Pin (red) anode

Code

No embedded code is used in this circuit.