Circuit Documentation

Summary

This document provides a detailed overview of a circuit designed to control a stepper motor using a DRV8825 driver, a Raspberry Pi 4B, and an AS5600 magnetic encoder. The circuit is powered by a 12V 5A power supply and includes an electrolytic capacitor for voltage stabilization. The Raspberry Pi 4B serves as the main controller, interfacing with the DRV8825 driver and the AS5600 encoder to control the stepper motor.

Component List

1. DRV8825

   • Description: Stepper motor driver
   • Pins: ENABLE, MS1, MS2, MS3, RESET, SLEEP, STEP, DIR, GND, FAULT, 1B, 1A, 2A, 2B, VMOT

2. POWER SUPPLY 12V 5AMP

   • Description: Power supply unit
   • Pins: 220V Positive Pole (AC), 220V Negative Pole (AC), GND, GND (DC), 12V-24V Output (DC)

3. Electrolytic Capacitor

   • Description: Capacitor for voltage stabilization
   • Pins: -, +
   • Properties: Capacitance: 0.0001 Farads

4. AS5600 Magnetic Encoder

   • Description: Magnetic encoder for position sensing
   • Pins: DIR, SCL, SDA, GP0, VCC, OUT, GND

5. Raspberry Pi 4B

   • Description: Main controller
   • Pins: 3V3, 5V, GPIO2, GPIO3, GND, GPIO4, GPIO14, GPIO15, GPIO17, GPIO18, GPIO27, GPIO22, GPIO23, GPIO24, GPIO10, GPIO9, GPIO25, GPIO11, GPIO8, GPIO7, ID_SD, GPIO5, GPIO6, GPIO12, GPIO13, GPIO19, GPIO16, GPIO26, GPIO20, GPIO21, ID_SC, TR01_TAP, TR00_TAP, TR03_TAP, TR02_TAP, RUN, GLOBAL_EN

6. Nema 17 42-STH48

   • Description: Stepper motor
   • Pins: A2 (black), A1 Green, B2 Red, B1 Blue

7. AC Source

   • Description: AC power source
   • Pins: +, -

Wiring Details

DRV8825

• RESET connected to SLEEP and 5V of Raspberry Pi 4B
• GND connected to GND (DC) of POWER SUPPLY 12V 5AMP, GND of Raspberry Pi 4B, and - of Electrolytic Capacitor
• STEP connected to GPIO22 of Raspberry Pi 4B
• DIR connected to GPIO10 of Raspberry Pi 4B
• VMOT connected to 12V-24V Output (DC) of POWER SUPPLY 12V 5AMP and + of Electrolytic Capacitor
• 1B connected to A2 (black) of Nema 17 42-STH48
• 1A connected to A1 Green of Nema 17 42-STH48
• 2A connected to B2 Red of Nema 17 42-STH48
• 2B connected to B1 Blue of Nema 17 42-STH48

POWER SUPPLY 12V 5AMP

• 220V Positive Pole (AC) connected to + of AC Source
• 220V Negative Pole (AC) connected to - of AC Source
• GND (DC) connected to GND of DRV8825, GND of Raspberry Pi 4B, and - of Electrolytic Capacitor
• 12V-24V Output (DC) connected to VMOT of DRV8825 and + of Electrolytic Capacitor

Electrolytic Capacitor

• - connected to GND (DC) of POWER SUPPLY 12V 5AMP, GND of DRV8825, and GND of Raspberry Pi 4B
• + connected to 12V-24V Output (DC) of POWER SUPPLY 12V 5AMP and VMOT of DRV8825

AS5600 Magnetic Encoder

• VCC connected to 5V of Raspberry Pi 4B
• SDA connected to GPIO4 of Raspberry Pi 4B
• GND connected to GND of Raspberry Pi 4B
• SCL connected to GPIO5 of Raspberry Pi 4B

Raspberry Pi 4B

• 5V connected to VCC of AS5600 Magnetic Encoder and RESET and SLEEP of DRV8825
• GND connected to GND (DC) of POWER SUPPLY 12V 5AMP, GND of DRV8825, - of Electrolytic Capacitor, and GND of AS5600 Magnetic Encoder
• GPIO22 connected to STEP of DRV8825
• GPIO10 connected to DIR of DRV8825
• GPIO4 connected to SDA of AS5600 Magnetic Encoder
• GPIO5 connected to SCL of AS5600 Magnetic Encoder

Nema 17 42-STH48

• A2 (black) connected to 1B of DRV8825
• A1 Green connected to 1A of DRV8825
• B2 Red connected to 2A of DRV8825
• B1 Blue connected to 2B of DRV8825

AC Source

• + connected to 220V Positive Pole (AC) of POWER SUPPLY 12V 5AMP
• - connected to 220V Negative Pole (AC) of POWER SUPPLY 12V 5AMP

Code

No code is provided for this circuit.

---

This document provides a comprehensive overview of the circuit, including a summary, component list, wiring details, and code section. Each component is described, and the wiring details are provided to ensure proper connections.