Circuit Documentation

Summary of the Circuit

The circuit in question is designed to switch between a 12V power supply and a 12V 200Ah battery to provide a continuous power source. The HX-M350 BackUp Battery Switching module is used to facilitate the automatic switching between the power supply and the battery in the event of a power outage or when the power supply is unable to provide sufficient power.

Component List

HX-M350 BackUp Battery Switching Module

• Description: A module designed to automatically switch between a primary power source and a backup battery.
• Pins: +, -
• Purpose: To ensure uninterrupted power supply by switching to the backup battery when the primary power source fails.

12V 200Ah Battery

• Description: A high-capacity battery that provides a 12V output.
• Pins: GND, 12V
• Purpose: To serve as the backup power source for the circuit.

12v Power Supply

• Description: A power supply unit that provides a stable 12V output.
• Pins: +, -
• Purpose: To serve as the primary power source for the circuit.

Wiring Details

HX-M350 BackUp Battery Switching Module

• Positive Pin (+): Connected to the positive pin (+) of the 12v power supply and the 12V pin of the 12V 200Ah Battery.
• Negative Pin (-): Connected to the negative pin (-) of the 12v power supply and the GND pin of the 12V 200Ah Battery.

12V 200Ah Battery

• 12V Pin: Connected to the positive pin (+) of the HX-M350 BackUp Battery Switching Module.
• GND Pin: Connected to the negative pin (-) of the HX-M350 BackUp Battery Switching Module.

12v Power Supply

• Positive Pin (+): Connected to the positive pin (+) of the HX-M350 BackUp Battery Switching Module.
• Negative Pin (-): Connected to the negative pin (-) of the HX-M350 BackUp Battery Switching Module.

Documented Code

There is no embedded code provided for any microcontrollers in this circuit. Therefore, this section is not applicable to the current documentation.