Circuit Documentation
Summary of the Circuit
This circuit integrates two infrared (IR) sensors with an ESP32 microcontroller. The purpose of the circuit is to detect IR signals using the sensors and process these signals with the ESP32. The IR sensors are powered by the 3.3V supply from the ESP32 and their output signals are connected to two of the ESP32's digital input pins. The ground pins of all components are connected together to establish a common reference point for the circuit.
Component List
ESP32
- Description: A microcontroller with Wi-Fi and Bluetooth capabilities, suitable for a wide range of applications.
- Pins: EN, VP, VN, D34, D35, D32, D33, D25, D26, D27, D14, D12, D13, GND, VIN, 3V3, D15, D2, D4, RX2, TX2, D5, D18, D19, D21, RX0, TX0, D22, D23, BOOT
IR Sensor 1
- Description: An infrared sensor capable of detecting IR signals.
- Pins: out, gnd, vcc
IR Sensor 2
- Description: An infrared sensor capable of detecting IR signals.
- Pins: out, gnd, vcc
Wiring Details
ESP32
- 3V3: Connected to the VCC pins of both IR sensors to provide power.
- GND: Connected to the GND pins of both IR sensors to provide a common ground.
- D14: Connected to the OUT pin of IR Sensor 1 to receive its signal.
- D13: Connected to the OUT pin of IR Sensor 2 to receive its signal.
IR Sensor 1
- VCC: Connected to the 3V3 pin of the ESP32 for power.
- GND: Connected to the GND pin of the ESP32 for a common ground.
- OUT: Connected to the D14 pin of the ESP32 to send its signal.
IR Sensor 2
- VCC: Connected to the 3V3 pin of the ESP32 for power.
- GND: Connected to the GND pin of the ESP32 for a common ground.
- OUT: Connected to the D13 pin of the ESP32 to send its signal.
Documented Code
No code has been provided for the microcontroller. The documentation of the code would typically include a description of the functionality, setup and loop functions, and any functions or libraries used to interface with the IR sensors. Since no code is available, this section remains empty until the code is provided.
Please note that the actual functionality of the circuit will depend on the embedded code running on the ESP32, which is not included in the provided inputs. The code would be responsible for initializing the IR sensors, reading their outputs, and performing any necessary processing or communication tasks.