Circuit Documentation
Summary
This circuit consists of a 3.3V battery, a rocker switch (SPST), and four red LEDs. The LEDs are connected in parallel, and their anodes are connected to the positive terminal of the battery. The cathodes of the LEDs are connected to one terminal of the rocker switch, while the other terminal of the switch is connected to the negative terminal of the battery. When the switch is closed, the circuit is completed, and the LEDs light up.
Component List
3.3V Battery
- Description: Provides the power supply for the circuit.
- Pins: +, -
LED: Two Pin (red)
- Description: Emits red light when current flows through it.
- Pins: Anode, Cathode
Rocker Switch (SPST)
- Description: A single-pole single-throw switch used to open or close the circuit.
- Pins: 1, 2
Wiring Details
3.3V Battery
Pin + is connected to:
- Anode of LED 1
- Anode of LED 2
- Anode of LED 3
- Anode of LED 4
Pin - is connected to:
- Pin 1 of the Rocker Switch
LED: Two Pin (red) - LED 1
Anode is connected to:
- Pin + of the 3.3V Battery
Cathode is connected to:
- Cathode of LED 2
- Cathode of LED 3
- Cathode of LED 4
- Pin 2 of the Rocker Switch
LED: Two Pin (red) - LED 2
Anode is connected to:
- Pin + of the 3.3V Battery
Cathode is connected to:
- Cathode of LED 1
- Cathode of LED 3
- Cathode of LED 4
- Pin 2 of the Rocker Switch
LED: Two Pin (red) - LED 3
Anode is connected to:
- Pin + of the 3.3V Battery
Cathode is connected to:
- Cathode of LED 1
- Cathode of LED 2
- Cathode of LED 4
- Pin 2 of the Rocker Switch
LED: Two Pin (red) - LED 4
Anode is connected to:
- Pin + of the 3.3V Battery
Cathode is connected to:
- Cathode of LED 1
- Cathode of LED 2
- Cathode of LED 3
- Pin 2 of the Rocker Switch
Rocker Switch (SPST)
Pin 1 is connected to:
- Pin - of the 3.3V Battery
Pin 2 is connected to:
- Cathode of LED 1
- Cathode of LED 2
- Cathode of LED 3
- Cathode of LED 4
Code
There is no code associated with this circuit.