Circuit Documentation

Summary

This circuit consists of an Arduino UNO microcontroller, a sound sensor, and an RGB LED module. The sound sensor detects sound levels and sends an analog signal to the Arduino UNO. The Arduino UNO processes this signal and controls the RGB LED module accordingly.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

Sound Sensor

• Description: A sensor module that detects sound levels.
• Pins: Analog, GND, VCC, Digital

RGB LED Module

• Description: An LED module with red, green, and blue LEDs.
• Pins: +VCC Red, +VCC Green, +VCC Blue, GND

Wiring Details

Arduino UNO

• 5V: Connected to VCC of the Sound Sensor
• GND: Connected to GND of the Sound Sensor and RGB LED Module
• A0: Connected to Analog pin of the Sound Sensor
• D6: Connected to +VCC Red of the RGB LED Module
• D5: Connected to +VCC Green of the RGB LED Module
• D3: Connected to +VCC Blue of the RGB LED Module

Sound Sensor

• VCC: Connected to 5V of the Arduino UNO
• GND: Connected to GND of the Arduino UNO
• Analog: Connected to A0 of the Arduino UNO

RGB LED Module

• +VCC Red: Connected to D6 of the Arduino UNO
• +VCC Green: Connected to D5 of the Arduino UNO
• +VCC Blue: Connected to D3 of the Arduino UNO
• GND: Connected to GND of the Arduino UNO

Documented Code

Arduino UNO Code (sketch.ino)

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Additional Documentation (documentation.txt)

This documentation provides a comprehensive overview of the circuit, including a summary, detailed component descriptions, wiring details, and the code used in the Arduino UNO.