Circuit Documentation

Summary

This document provides a detailed description of a simple electronic circuit consisting of a 9V battery, a red LED, and a 200 Ohm resistor. The circuit is designed to light up the LED when the battery is connected.

Component List

LED: Two Pin (red)

• Description: A red light-emitting diode (LED) with two pins: anode and cathode.
• Pins:
  • Anode
  • Cathode

9V Battery

• Description: A 9V battery used as the power source for the circuit.
• Pins:
  • Positive (+)
  • Negative (-)

Resistor

• Description: A resistor with a resistance of 200 Ohms.
• Pins:
  • Pin 1
  • Pin 2
• Properties:
  • Resistance: 200 Ohms

Wiring Details

LED: Two Pin (red)

• Anode: Connected to the negative (-) pin of the 9V battery.
• Cathode: Connected to Pin 1 of the resistor.

9V Battery

• Positive (+): Connected to Pin 2 of the resistor.
• Negative (-): Connected to the anode of the LED.

Resistor

• Pin 1: Connected to the cathode of the LED.
• Pin 2: Connected to the positive (+) pin of the 9V battery.

Code

There is no microcontroller code associated with this circuit.