Circuit Documentation

Summary

The circuit in question appears to be a control system utilizing two ESP32 microcontrollers, interfaced with a variety of components including pushbuttons, an Advancer Muscle Sensor V3, a relay module, a loudspeaker, a bulb, a fan, and a power supply. The ESP32s are responsible for processing inputs from the pushbuttons and the muscle sensor, and controlling outputs like the loudspeaker, relay module, bulb, and fan. The relay module acts as an intermediary to control the high-power devices (bulb and fan) safely. The power supply provides the necessary voltage and current to the components.

Component List

Microcontrollers

• ESP32 (30 pin): A microcontroller with Wi-Fi and Bluetooth capabilities, featuring a wide range of GPIO pins for interfacing with various sensors and actuators.

Sensors

• Advancer Muscle Sensor V3: A sensor that measures muscle activity by detecting the electric potential generated by muscle cells.

Actuators

• Relay 4 Channel 5v: A module with four relays that can control high power devices such as motors and lights.
• Bulb: An electric light source.
• Fan: An electric device that creates airflow.
• Loudspeaker: An electroacoustic transducer that converts an electrical audio signal into a corresponding sound.

Input Devices

• Pushbutton: A simple switch mechanism for controlling some aspect of a machine or a process.

Power Supply

• Power Supply: Provides electrical power to the circuit.

Miscellaneous

• Comment: Used for annotations or notes within the circuit, not an actual physical component.

Wiring Details

ESP32 (30 pin)

• Digital Pins:
  • D34, D35, D32, D33 are connected to pushbuttons.
  • D13 is connected to the signal output of the Advancer Muscle Sensor V3.
  • D25 is connected to the loudspeaker.
  • D5, D4, D2, D15 are connected to the relay module inputs.
• Power Pins:
  • Vin is connected to the positive voltage supply of the Advancer Muscle Sensor V3.
  • 3V3 is connected to the VCC of the relay module.
  • GND is a common ground shared with pushbuttons, the muscle sensor, the loudspeaker, and the relay module.

Advancer Muscle Sensor V3

• Power Pins:
  • +Vs is connected to Vin of the ESP32.
  • GND is connected to the common ground.
• Output Pin:
  • SIG is connected to D13 of the ESP32.

Pushbutton

• One side of each pushbutton is connected to a digital pin on the ESP32 (D34, D35, D32, D33).
• The other side of each pushbutton is connected to the common ground.

Relay 4 Channel 5v

• Input Pins:
  • IN1, IN2, IN3, IN4 are connected to D5, D4, D2, D15 of the ESP32 respectively.
• Common Pins:
  • COM1, COM2 are connected to the positive terminal of the power supply.
• Normally Open (NO) Pins:
  • NO1 is connected to the bulb.
  • NO2 is connected to the fan.
• Power Pins:
  • VCC is connected to 3V3 of the ESP32.
  • GND is connected to the common ground.

Bulb

• +VE is connected to NO1 of the relay module.
• _VE is connected to the negative terminal of the power supply.

Fan

• 5V is connected to NO2 of the relay module.
• GND is connected to the negative terminal of the power supply.

Loudspeaker

• pin1 is connected to D25 of the ESP32.
• pin2 is connected to the common ground.

Power Supply

• + is connected to COM1 and COM2 of the relay module.
• - is connected to the negative terminals of the bulb and the fan.

Documented Code

No code was provided for the microcontrollers in the circuit. For a complete documentation, the code should be included to illustrate how the ESP32 microcontrollers are programmed to interact with the sensors, actuators, and input devices.