Circuit Documentation
Summary
This circuit consists of two red LEDs, two resistors, and a 9V battery. The LEDs are connected in parallel, each with its own current-limiting resistor. The anodes of the LEDs are connected to the positive terminal of the battery, and the cathodes are connected to the resistors, which are then connected to the negative terminal of the battery.
Component List
LED: Two Pin (red)
- Pins: Cathode, Anode
- Description: A red light-emitting diode.
- Purpose: To emit light when current flows through it.
Resistor
- Pins: Pin1, Pin2
- Description: A resistor with a resistance of 360 Ohms.
- Purpose: To limit the current flowing through the LEDs.
9V Battery
- Pins: +, -
- Description: A 9V power source.
- Purpose: To provide the necessary voltage for the circuit.
Wiring Details
LED: Two Pin (red)
- Anode: Connected to the positive terminal of the 9V battery.
- Cathode: Connected to Pin2 of the first resistor.
LED: Two Pin (red)
- Anode: Connected to the positive terminal of the 9V battery.
- Cathode: Connected to Pin2 of the second resistor.
Resistor
- Pin1: Connected to the negative terminal of the 9V battery.
- Pin2: Connected to the cathode of the first LED.
Resistor
- Pin1: Connected to the negative terminal of the 9V battery.
- Pin2: Connected to the cathode of the second LED.
9V Battery
- Positive Terminal (+): Connected to the anodes of both LEDs.
- Negative Terminal (-): Connected to Pin1 of both resistors.
Code
There is no microcontroller code associated with this circuit.
This documentation provides a comprehensive overview of the circuit, including a summary, detailed component list, wiring details, and any associated code.