Circuit Documentation
Summary
This document provides a detailed overview of a circuit involving an ESP32 CAM module and an FTDI Programmer. The ESP32 CAM is used for capturing images and video, while the FTDI Programmer is used for programming the ESP32 CAM. The document includes a list of components, wiring details, and any associated code.
Component List
ESP32 CAM
- Description: The ESP32 CAM is a low-cost development board with a camera module. It is capable of capturing images and video and can be programmed using various development environments.
- Pins: 5V, GND, GPIO12, GPIO13, GPIO15, GPIO14, GPIO2, GPIO4, 3.3V, GPIO16, GPIO0, 3.3V / 5V / P_OUT, GPIO3 / RX, GPIO1 / TX
FTDI Programmer
- Description: The FTDI Programmer is used to program microcontrollers via USB. It provides a serial interface for communication and programming.
- Pins: DTR, RX, TX, VCC, CTS, GND
Wiring Details
ESP32 CAM
- 5V: Connected to FTDI Programmer VCC
- GND: Connected to FTDI Programmer GND
- GPIO0: Connected to ESP32 CAM GND
- GPIO3 / RX: Connected to FTDI Programmer TX
- GPIO1 / TX: Connected to FTDI Programmer RX
FTDI Programmer
- VCC: Connected to ESP32 CAM 5V
- GND: Connected to ESP32 CAM GND
- TX: Connected to ESP32 CAM GPIO3 / RX
- RX: Connected to ESP32 CAM GPIO1 / TX
Code
There is no code provided for this circuit.
This document provides a comprehensive overview of the circuit, including the components used and their interconnections. The ESP32 CAM and FTDI Programmer are connected to facilitate programming and communication.