Circuit Documentation

Summary

This document provides a detailed overview of a circuit consisting of an Arduino UNO, a 9V Battery, and a Bluetooth module HM-10. The Arduino UNO is powered by the 9V Battery and communicates with the Bluetooth module HM-10. The document includes a component list, wiring details, and the embedded code used in the circuit.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

9V Battery

• Description: A standard 9V battery used to power the circuit.
• Pins: -, +

Bluetooth module HM-10

• Description: A Bluetooth Low Energy (BLE) module used for wireless communication.
• Pins: BRK, RX, TX, GND, VCC, State

Wiring Details

Arduino UNO

• 5V connected to VCC of Bluetooth module HM-10
• GND connected to GND of Bluetooth module HM-10
• GND connected to - of 9V Battery
• Vin connected to + of 9V Battery

9V Battery

• - connected to GND of Arduino UNO
• + connected to Vin of Arduino UNO

Bluetooth module HM-10

• VCC connected to 5V of Arduino UNO
• GND connected to GND of Arduino UNO

Code

Arduino UNO Code

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

This code is a basic template for the Arduino UNO. The setup() function runs once when the microcontroller is powered on or reset, and the loop() function runs continuously.

---

This document provides a comprehensive overview of the circuit, including the components used, their wiring, and the embedded code. This should serve as a useful reference for understanding and replicating the circuit.