Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an ESP32 microcontroller, various sensors (DHT11, LDR, Soil Moisture Sensor), and LEDs. The circuit is designed to monitor environmental conditions such as temperature, humidity, light intensity, and soil moisture levels. The ESP32 microcontroller processes the sensor data and controls the LEDs based on the sensor readings.

Component List

1. ESP32

   • Description: A powerful microcontroller with built-in Wi-Fi and Bluetooth capabilities.
   • Pins: EN, VP, VN, D34, D35, D32, D33, D25, D26, D27, D14, D12, D13, GND, VIN, 3V3, D15, D2, D4, RX2, TX2, D5, D18, D19, D21, RX0, TX0, D22, D23, BOOT

2. DHT11

   • Description: A digital temperature and humidity sensor.
   • Pins: VCC, GND, DATA

3. Module LDR

   • Description: A light-dependent resistor module for measuring light intensity.
   • Pins: VCC, GND, DO, AO

4. Soil Moisture Module

   • Description: A module for measuring soil moisture levels.
   • Pins: positive, negative, Analog, Digital, Ground, VCC

5. LED: Two Pin (red)

   • Description: A red LED with two pins.
   • Pins: cathode, anode

6. LED: Two Pin (green)

   • Description: A green LED with two pins.
   • Pins: cathode, anode

7. LED: Two Pin (yellow)

   • Description: A yellow LED with two pins.
   • Pins: cathode, anode

8. Soil Moisture Sensor

   • Description: A sensor for detecting soil moisture levels.
   • Pins: VCC, GND, SIG

Wiring Details

ESP32

• D34: Connected to Soil Moisture Module (Digital)
• D35: Connected to Module LDR (DO)
• D25: Connected to LED: Two Pin (green) (anode)
• D26: Connected to LED: Two Pin (yellow) (anode)
• D27: Connected to LED: Two Pin (red) (anode)
• D19: Connected to DHT11 (DATA)
• GND: Connected to Soil Moisture Module (Ground), DHT11 (GND), LED: Two Pin (yellow) (cathode), LED: Two Pin (green) (cathode), LED: Two Pin (red) (cathode), Module LDR (GND)
• 3V3: Connected to Soil Moisture Module (VCC), DHT11 (VCC), Module LDR (VCC)

DHT11

• VCC: Connected to ESP32 (3V3)
• GND: Connected to ESP32 (GND)
• DATA: Connected to ESP32 (D19)

Module LDR

• VCC: Connected to ESP32 (3V3)
• GND: Connected to ESP32 (GND)
• DO: Connected to ESP32 (D35)

Soil Moisture Module

• Digital: Connected to ESP32 (D34)
• Ground: Connected to ESP32 (GND)
• VCC: Connected to ESP32 (3V3)
• positive: Connected to Soil Moisture Sensor (VCC)
• negative: Connected to Soil Moisture Sensor (GND)

LED: Two Pin (red)

• anode: Connected to ESP32 (D27)
• cathode: Connected to ESP32 (GND)

LED: Two Pin (green)

• anode: Connected to ESP32 (D25)
• cathode: Connected to ESP32 (GND)

LED: Two Pin (yellow)

• anode: Connected to ESP32 (D26)
• cathode: Connected to ESP32 (GND)

Soil Moisture Sensor

• VCC: Connected to Soil Moisture Module (positive)
• GND: Connected to Soil Moisture Module (negative)

Code

There is no code provided for the microcontrollers in this circuit.

---

This document provides a comprehensive overview of the circuit, including a summary, component list, wiring details, and code documentation. The wiring details section ensures that each component's connections are clearly outlined, facilitating easy assembly and troubleshooting.