Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes a Raspberry Pi Zero W and a TCS3472 Color Light-to-Digital Converter with IR Filter. The Raspberry Pi Zero W serves as the main controller, interfacing with the TCS3472 sensor to read color data. The circuit is designed to power the sensor and facilitate communication between the Raspberry Pi and the sensor.

Component List

1. Raspberry Pi Zero W

   • Description: A small, affordable, and powerful single-board computer.
   • Pins: 5V, 3V3, GPIO2 (SDA), GPIO 3, GROUND, GPIO 14, GPIO15, GPIO 18, GND, GPIO 23, GPIO24, GPIO 25, GPIO 8, GPIO 7, GPIO 1, GPIO 12, GPIO 16, GPIO 20, GPIO 21, GPIO 04, GPIO 17, GPIO 27, GPIO 22, GPIO 10, GPIO 9, GPIO 11, GPIO 0, GPIO 5, GPIO 6, GPIO 13, GPIO 19, GPIO 26, CSI (CAMERA)

2. TCS3472 Color Light-to-Digital Converter with IR Filter

   • Description: A sensor that converts light to digital values, with an integrated IR filter.
   • Pins: LED, INT, SDA, SCL, 3V3, GND, VIN

Wiring Details

Raspberry Pi Zero W

• 3V3: Connected to VIN of TCS3472 Color Light-to-Digital Converter with IR Filter
• GPIO2 (SDA): Connected to SDA of TCS3472 Color Light-to-Digital Converter with IR Filter
• GPIO 3: Connected to SCL of TCS3472 Color Light-to-Digital Converter with IR Filter
• GROUND: Connected to GND of TCS3472 Color Light-to-Digital Converter with IR Filter
• GPIO 14: Connected to LED of TCS3472 Color Light-to-Digital Converter with IR Filter

TCS3472 Color Light-to-Digital Converter with IR Filter

• VIN: Connected to 3V3 of Raspberry Pi Zero W
• SDA: Connected to GPIO2 (SDA) of Raspberry Pi Zero W
• SCL: Connected to GPIO 3 of Raspberry Pi Zero W
• GND: Connected to GROUND of Raspberry Pi Zero W
• LED: Connected to GPIO 14 of Raspberry Pi Zero W

Code

No code is provided for this circuit.

---

This document provides a comprehensive overview of the components and wiring details for the circuit. If you have any questions or need further assistance, please feel free to reach out.