Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an Arduino UNO microcontroller, an IRFZ44N MOSFET, a Coreless Motor Clock, a Micro Servo 9G, and a DC Power Source. The circuit is designed to control a motor and a servo using the Arduino UNO.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

IRFZ44N

• Description: A N-channel power MOSFET.
• Pins: Gate, Drain, Source

Coreless Motor Clock

• Description: A small, lightweight motor.
• Pins: +, -

Micro Servo 9G

• Description: A small servo motor.
• Pins: GND, +5V, PWM

DC Power Source

• Description: Provides power to the circuit.
• Pins: Ground, Positive

Wiring Details

Arduino UNO

• D10: Connected to Gate of IRFZ44N
• D9: Connected to PWM of Micro Servo 9G

IRFZ44N

• Gate: Connected to D10 of Arduino UNO
• Drain: Connected to - of Coreless Motor Clock
• Source: Connected to Ground of DC Power Source and +5V of Micro Servo 9G

Coreless Motor Clock

• -: Connected to Drain of IRFZ44N
• +: Connected to Positive of DC Power Source and GND of Micro Servo 9G

Micro Servo 9G

• PWM: Connected to D9 of Arduino UNO
• +5V: Connected to Source of IRFZ44N
• GND: Connected to Positive of DC Power Source and + of Coreless Motor Clock

DC Power Source

• Ground: Connected to Source of IRFZ44N and +5V of Micro Servo 9G
• Positive: Connected to + of Coreless Motor Clock and GND of Micro Servo 9G

Code Documentation

Arduino UNO Code

sketch.ino

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

documentation.txt

This document provides a comprehensive overview of the circuit, including a summary, component list, wiring details, and documented code.