Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an ESP32 microcontroller, a GPS NEO 6M module, a MAX30100 sensor, a water sensor, a photocell (LDR), and a resistor. The document includes a component list, wiring details, and code documentation.

Component List

ESP32

• Description: A powerful microcontroller with integrated Wi-Fi and Bluetooth capabilities.
• Pins: EN, VP, VN, D34, D35, D32, D33, D25, D26, D27, D14, D12, D13, GND, VIN, 3V3, D15, D2, D4, RX2, TX2, D5, D18, D19, D21, RX0, TX0, D22, D23, BOOT

GPS NEO 6M

• Description: A GPS module used for obtaining location data.
• Pins: VCC, RX, TX, GND

MAX30100

• Description: A sensor module used for measuring heart rate and SpO2 levels.
• Pins: Vin, gnd, scl, sda, int

Water Sensor

• Description: A sensor used for detecting the presence of water.
• Pins: Signal, VCC, GND

Photocell (LDR)

• Description: A light-dependent resistor used for measuring light intensity.
• Pins: pin 0, pin 1

Resistor

• Description: A 10k Ohm resistor used for current limiting or voltage division.
• Pins: pin1, pin2
• Properties:
  • Resistance: 10,000 Ohms

Wiring Details

ESP32

• D34 is connected to pin2 of the Resistor.
• D35 is connected to Signal of the Water Sensor.
• 3V3 is connected to:
  • VCC of the GPS NEO 6M
  • Vin of the MAX30100
  • VCC of the Water Sensor
  • pin 1 of the Photocell (LDR)
• GND is connected to:
  • GND of the GPS NEO 6M
  • gnd of the MAX30100
  • GND of the Water Sensor
  • pin 0 of the Photocell (LDR)
  • pin1 of the Resistor
• RX2 is connected to TX of the GPS NEO 6M.
• TX2 is connected to RX of the GPS NEO 6M.
• D21 is connected to sda of the MAX30100.
• D22 is connected to scl of the MAX30100.

GPS NEO 6M

• VCC is connected to 3V3 of the ESP32.
• RX is connected to TX2 of the ESP32.
• TX is connected to RX2 of the ESP32.
• GND is connected to GND of the ESP32.

MAX30100

• Vin is connected to 3V3 of the ESP32.
• gnd is connected to GND of the ESP32.
• scl is connected to D22 of the ESP32.
• sda is connected to D21 of the ESP32.

Water Sensor

• Signal is connected to D35 of the ESP32.
• VCC is connected to 3V3 of the ESP32.
• GND is connected to GND of the ESP32.

Photocell (LDR)

• pin 0 is connected to GND of the ESP32.
• pin 1 is connected to 3V3 of the ESP32.

Resistor

• pin1 is connected to GND of the ESP32.
• pin2 is connected to D34 of the ESP32.

Code Documentation

No code is provided for this circuit.

---

This document provides a comprehensive overview of the circuit, including the components used and their interconnections. This should serve as a useful reference for understanding and replicating the circuit.