Circuit Documentation

Summary

This document provides a detailed overview of a simple circuit involving an Arduino UNO microcontroller and a DHT 11 temperature and humidity sensor. The Arduino UNO is used to read data from the DHT 11 sensor. The circuit includes power connections and a data connection between the Arduino and the sensor.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

DHT 11

• Description: A basic, low-cost digital temperature and humidity sensor.
• Pins: VCC, GND, DATA

Wiring Details

Arduino UNO

• 5V: Connected to VCC of DHT 11
• GND: Connected to GND of DHT 11
• D2: Connected to DATA of DHT 11

DHT 11

• VCC: Connected to 5V of Arduino UNO
• GND: Connected to GND of Arduino UNO
• DATA: Connected to D2 of Arduino UNO

Documented Code

Arduino UNO Code

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Additional Documentation

This document provides a comprehensive overview of the circuit, including the components used, their connections, and the code running on the Arduino UNO.