Circuit Documentation

Summary of the Circuit

This circuit integrates an Arduino 101 microcontroller with a TCS3200 color sensor, a 16x2 I2C LCD display, and a buzzer. The Arduino 101 serves as the central processing unit, interfacing with the TCS3200 color sensor to detect color information, displaying data on the LCD, and controlling the buzzer based on certain conditions. The I2C communication protocol is used to interface with the LCD, while the TCS3200 color sensor and the buzzer are connected to the digital pins of the Arduino. The circuit is powered by the Arduino's 5V output, which is distributed to the other components.

Component List

Arduino 101

• Microcontroller board based on the Intel Curie
• Pins: A5/SCL, A4/SDA, AREF, GND, D13/SCK, D12/MISO, D11 PWM/MOSI, D10 PWM/SS, D9 PWM, D8, D7, D6 PWM, D5 PWM, D4, D3 PWM, D2, D1/TX, D0/RX, AIN, ioref, RESET, 3V3, 5V, VIN, A0, A1, A2, A3, ICSP MISO, ICSP SCK, ICSP MOSI

TCS3200 Color Sensor

• Color sensor module that provides a digital output based on detected color
• Pins: GND, OUT, S2, S3, VCC, LED, S0, S1

16x2 I2C LCD

• Alphanumeric liquid crystal display with an I2C interface
• Pins: GND, VCC, SDA, SCL

Buzzer

• An electronic buzzer for producing sound
• Pins: PIN, GND

Wiring Details

Arduino 101

• A5/SCL connected to 16x2 I2C LCD SCL
• A4/SDA connected to 16x2 I2C LCD SDA
• GND connected to TCS3200 GND, 16x2 I2C LCD GND, and Buzzer GND
• D8 connected to Buzzer PIN
• D6 PWM connected to TCS3200 OUT
• D5 PWM connected to TCS3200 S3
• D4 connected to TCS3200 S2
• D3 PWM connected to TCS3200 S1
• D2 connected to TCS3200 S0
• 5V connected to TCS3200 VCC, 16x2 I2C LCD VCC

TCS3200 Color Sensor

• GND connected to Arduino 101 GND
• OUT connected to Arduino 101 D6 PWM
• S3 connected to Arduino 101 D5 PWM
• S2 connected to Arduino 101 D4
• S1 connected to Arduino 101 D3 PWM
• S0 connected to Arduino 101 D2
• VCC connected to Arduino 101 5V

16x2 I2C LCD

• GND connected to Arduino 101 GND
• VCC connected to Arduino 101 5V
• SDA connected to Arduino 101 A4/SDA
• SCL connected to Arduino 101 A5/SCL

Buzzer

• PIN connected to Arduino 101 D8
• GND connected to Arduino 101 GND

Documented Code

Since no code was provided, this section is left blank. Normally, this section would include the source code for the microcontroller, along with comments explaining the functionality of the code and how it interacts with the connected components.