Circuit Documentation

Summary

This circuit consists of an Arduino UNO microcontroller, a blue LED, a buzzer, and an IR sensor. The Arduino UNO serves as the central control unit, interfacing with the other components to create a functional system. The LED and buzzer provide visual and auditory feedback, respectively, while the IR sensor detects infrared signals.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

LED: Two Pin (blue)

• Description: A blue light-emitting diode.
• Pins: cathode, anode

Buzzer

• Description: An electronic device that produces a sound.
• Pins: PIN, GND

IR Sensor

• Description: A sensor that detects infrared light.
• Pins: out, gnd, vcc

Wiring Details

Arduino UNO

• GND: Connected to the GND pins of the buzzer, LED, and IR sensor.
• D7: Connected to the PIN of the buzzer.
• D8: Connected to the cathode of the LED.
• 5V: Connected to the vcc of the IR sensor.
• D12: Connected to the out of the IR sensor.

LED: Two Pin (blue)

• cathode: Connected to D8 of the Arduino UNO.
• anode: Connected to the GND of the Arduino UNO.

Buzzer

• PIN: Connected to D7 of the Arduino UNO.
• GND: Connected to the GND of the Arduino UNO.

IR Sensor

• out: Connected to D12 of the Arduino UNO.
• gnd: Connected to the GND of the Arduino UNO.
• vcc: Connected to the 5V of the Arduino UNO.

Documented Code

Arduino UNO Code (sketch.ino)

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Additional Documentation (documentation.txt)

This documentation provides a comprehensive overview of the circuit, including a summary, detailed component list, wiring details, and the code used in the Arduino UNO.