Circuit Documentation
Summary of the Circuit
This circuit is a simple LED lighting system powered by two AA batteries. It consists of a battery mount, an LED, and a resistor. The LED is connected in series with the resistor to limit the current flowing through the LED, ensuring that it operates within its safe parameters. The circuit does not include any microcontrollers or complex logic, making it straightforward and easy to understand.
Component List
2 x AA Battery Mount
- Description: A mount for holding two AA batteries in series.
- Pins:
-(Negative),+(Positive) - Purpose: To provide a power source for the circuit.
LED: Two Pin (red)
- Description: A basic red LED with two pins.
- Pins:
cathode(Negative),anode(Positive) - Purpose: To emit light when powered.
Resistor
- Description: A passive two-pin component that resists the flow of current.
- Pins:
pin1,pin2 - Properties: Resistance: 220 Ohms
- Purpose: To limit the current flowing through the LED.
Wiring Details
2 x AA Battery Mount
- Positive Pin: Connected to the cathode of the LED.
- Negative Pin: No direct connection specified in the net list.
LED: Two Pin (red)
- Cathode: Connected to the positive pin of the 2 x AA Battery Mount.
- Anode: Connected to pin2 of the Resistor.
Resistor
- Pin1: Connected to the negative pin of the second 2 x AA Battery Mount.
- Pin2: Connected to the anode of the LED.
Documented Code
There is no embedded code provided for this circuit as it does not include any programmable components or microcontrollers.