Circuit Documentation
Summary
This circuit involves a Raspberry Pi 5 connected to three LEDs (green, orange, and red) through GPIO pins. Each LED is connected in series with a 220 Ohm resistor. Additionally, there are two PIR sensors in the circuit, although their connections are not specified in the provided net list.
Component List
Raspberry Pi 5
- Description: A single-board computer with multiple GPIO pins for interfacing with other components.
- Pins: Type-C, Micro HDMI 1, Micro HDMI 2, Camera 1, Camera 2, PoE, Fan, PCIe, USB 3.0, USB 2.0, Ethernet, 5V, GND, 3.3v, GPIO 14, GPIO 15, GPIO 18, GPIO 23, GPIO 24, GPIO 25, GPIO 8, GPIO 7, GPIO 1, GPIO 12, GPIO 16, GPIO 20, GPIO 21, GPIO 2, GPIO 3, GPIO 4, GPIO 17, GPIO 27, GPIO 22, GPIO 10, GPIO 9, GPIO 11, GPIO 0, GPIO 5, GPIO 6, GPIO 13, GPIO 19, GPIO 26
PIR Sensor
- Description: A passive infrared sensor used to detect motion.
- Pins: VDD, SIG, GND
PIR Sensor
- Description: A passive infrared sensor used to detect motion.
- Pins: VDD, SIG, GND
Resistor (220 Ohms)
- Description: A resistor with a resistance of 220 Ohms.
- Pins: pin1, pin2
LED: Two Pin (green)
- Description: A green LED with two pins.
- Pins: cathode, anode
Resistor (220 Ohms)
- Description: A resistor with a resistance of 220 Ohms.
- Pins: pin1, pin2
LED: Two Pin (orange)
- Description: An orange LED with two pins.
- Pins: cathode, anode
Resistor (220 Ohms)
- Description: A resistor with a resistance of 220 Ohms.
- Pins: pin1, pin2
LED: Two Pin (red)
- Description: A red LED with two pins.
- Pins: cathode, anode
Wiring Details
Raspberry Pi 5
GND is connected to:
- pin2 of Resistor (220 Ohms)
- pin2 of Resistor (220 Ohms)
- pin2 of Resistor (220 Ohms)
GPIO 14 is connected to:
- anode of LED: Two Pin (green)
GPIO 15 is connected to:
- anode of LED: Two Pin (orange)
GPIO 18 is connected to:
- anode of LED: Two Pin (red)
Resistor (220 Ohms)
pin1 is connected to:
- cathode of LED: Two Pin (green)
pin2 is connected to:
- GND of Raspberry Pi 5
LED: Two Pin (green)
anode is connected to:
- GPIO 14 of Raspberry Pi 5
cathode is connected to:
- pin1 of Resistor (220 Ohms)
Resistor (220 Ohms)
pin1 is connected to:
- cathode of LED: Two Pin (orange)
pin2 is connected to:
- GND of Raspberry Pi 5
LED: Two Pin (orange)
anode is connected to:
- GPIO 15 of Raspberry Pi 5
cathode is connected to:
- pin1 of Resistor (220 Ohms)
Resistor (220 Ohms)
pin1 is connected to:
- cathode of LED: Two Pin (red)
pin2 is connected to:
- GND of Raspberry Pi 5
LED: Two Pin (red)
anode is connected to:
- GPIO 18 of Raspberry Pi 5
cathode is connected to:
- pin1 of Resistor (220 Ohms)
Documented Code
No code was provided for this circuit.