Circuit Documentation
Summary
This circuit consists of an Arduino UNO microcontroller and an LM35 temperature sensor. The Arduino UNO reads the temperature data from the LM35 sensor and can be programmed to process or display this data.
Component List
Arduino UNO
- Description: A microcontroller board based on the ATmega328P.
- Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0
- Purpose in Circuit: Acts as the main controller to read data from the temperature sensor and execute the embedded code.
Temperature Sensor (LM35)
- Description: A precision integrated-circuit temperature sensor, whose output voltage is linearly proportional to the Celsius temperature.
- Pins: +Vs, Vout, GND
- Purpose in Circuit: Measures the ambient temperature and provides an analog voltage output corresponding to the temperature.
Wiring Details
Arduino UNO
- 5V: Connected to +Vs of the Temperature Sensor (LM35)
- GND: Connected to GND of the Temperature Sensor (LM35)
- A0: Connected to Vout of the Temperature Sensor (LM35)
Temperature Sensor (LM35)
- +Vs: Connected to 5V of the Arduino UNO
- GND: Connected to GND of the Arduino UNO
- Vout: Connected to A0 of the Arduino UNO
Documented Code
Arduino UNO Code (sketch.ino)
void setup() {
// put your setup code here, to run once:
}
void loop() {
// put your main code here, to run repeatedly:
}
Documentation (documentation.txt)
This documentation provides a comprehensive overview of the circuit, including the components used, their connections, and the embedded code for the Arduino UNO.