Circuit Documentation

Summary

This document provides a detailed overview of a circuit that integrates a Raspberry Pi 5, a W5500 Ethernet module, and a resistor. The Raspberry Pi 5 serves as the main controller, interfacing with the W5500 Ethernet module for network connectivity. A resistor is used in the circuit to manage current flow.

Component List

Raspberry Pi 5

• Description: A powerful single-board computer with multiple GPIO pins for various interfacing needs.
• Pins: Type-C, Micro HDMI 1, Micro HDMI 2, Camera 1, Camera 2, PoE, Fan, PCIe, USB 3.0, USB 2.0, Ethernet, 5V, GND, 3.3v, GPIO 14, GPIO 15, GPIO 18, GPIO 23, GPIO 24, GPIO 25, GPIO 8, GPIO 7, GPIO 1, GPIO 12, GPIO 16, GPIO 20, GPIO 21, GPIO 2, GPIO 3, GPIO 4, GPIO 17, GPIO 27, GPIO 22, GPIO 10, GPIO 9, GPIO 11, GPIO 0, GPIO 5, GPIO 6, GPIO 13, GPIO 19, GPIO 26

Module Ethernet W5500

• Description: An Ethernet module based on the W5500 chip, used for network connectivity.
• Pins: NC, INT, RST, GND, 5V, SCK, SS, MOSI, MISO, 3.3V

Resistor

• Description: A passive electrical component that implements electrical resistance as a circuit element.
• Pins: pin1, pin2
• Properties:
  • Resistance: 10,000 Ohms

Wiring Details

Raspberry Pi 5

• GPIO 25 is connected to INT of the W5500 Ethernet module.
• GPIO 11 is connected to SCK of the W5500 Ethernet module.
• GPIO 8 is connected to SS of the W5500 Ethernet module.
• GPIO 10 is connected to MOSI of the W5500 Ethernet module.
• GPIO 9 is connected to MISO of the W5500 Ethernet module.
• 3.3v is connected to pin1 of the resistor and 3.3V of the W5500 Ethernet module.
• GND is connected to GND of the W5500 Ethernet module.

Module Ethernet W5500

• INT is connected to GPIO 25 of the Raspberry Pi 5.
• RST is connected to pin2 of the resistor.
• SCK is connected to GPIO 11 of the Raspberry Pi 5.
• SS is connected to GPIO 8 of the Raspberry Pi 5.
• MOSI is connected to GPIO 10 of the Raspberry Pi 5.
• MISO is connected to GPIO 9 of the Raspberry Pi 5.
• 3.3V is connected to pin1 of the resistor and 3.3v of the Raspberry Pi 5.
• GND is connected to GND of the Raspberry Pi 5.

Resistor

• pin1 is connected to 3.3v of the Raspberry Pi 5 and 3.3V of the W5500 Ethernet module.
• pin2 is connected to RST of the W5500 Ethernet module.

Code

No code is provided for this circuit.

---

This document provides a comprehensive overview of the circuit, including a summary, detailed component descriptions, wiring details, and code documentation.