Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an Arduino Nano, an RF Transmitter Module, an Arcade Button, and two 18650 Li-ion Batteries. The circuit is designed to interface the Arduino Nano with the RF Transmitter and Arcade Button, powered by the Li-ion batteries.

Component List

Arduino Nano

• Description: A small, complete, and breadboard-friendly board based on the ATmega328P.
• Pins: D1/TX, D0/RX, RESET, GND, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11/MOSI, D12/MISO, VIN, 5V, A7, A6, A5, A4, A3, A2, A1, A0, AREF, 3V3, D13/SCK

Transmitter RF Module

• Description: A module used for wireless communication.
• Pins: DATA, VCC, GND

Arcade Button (green)

• Description: A simple push-button switch.
• Pins: no name yet

18650 Li-ion Battery

• Description: A rechargeable lithium-ion battery.
• Pins: -, +

Li-ion 18650 Battery

• Description: Another rechargeable lithium-ion battery.
• Pins: -, +

Wiring Details

Arduino Nano

• GND: Connected to the GND pin of the Transmitter RF Module, Arcade Button, and the negative terminal of the 18650 Li-ion Battery.
• D3: Connected to the DATA pin of the Transmitter RF Module.
• D5: Connected to the pin of the Arcade Button.
• VIN: Connected to the positive terminal of the 18650 Li-ion Battery.
• 3V3: Connected to the VCC pin of the Transmitter RF Module.

Transmitter RF Module

• GND: Connected to the GND pin of the Arduino Nano and the Arcade Button.
• DATA: Connected to the D3 pin of the Arduino Nano.
• VCC: Connected to the 3V3 pin of the Arduino Nano.

Arcade Button (green)

• Pin: Connected to the GND pin of the Transmitter RF Module and the D5 pin of the Arduino Nano.

18650 Li-ion Battery

• Positive Terminal (+): Connected to the VIN pin of the Arduino Nano.
• Negative Terminal (-): Connected to the GND pin of the Arduino Nano.

Li-ion 18650 Battery

• Positive Terminal (+): Not connected in this circuit.
• Negative Terminal (-): Not connected in this circuit.

Code Documentation

Arduino Nano Code

sketch.ino

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

documentation.txt

This document provides a comprehensive overview of the circuit, including the components used, their connections, and the code running on the Arduino Nano.