Circuit Documentation

Summary

This circuit involves an Arduino UNO microcontroller, a Servo motor, a Light Dependent Resistor (LDR) module, a push switch, and a 9V battery. The Arduino UNO serves as the central controller, interfacing with the Servo motor, LDR module, and push switch. The 9V battery powers the entire circuit.

Component List

Arduino UNO

• Description: A microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

Servo

• Description: A motor that can be controlled to move to a specific position.
• Pins: gnd, vcc, pulse

Module LDR

• Description: A light-dependent resistor module used to detect light intensity.
• Pins: VCC, GND, DO, AO

2Pin Push Switch

• Description: A simple push-button switch.
• Pins: Input +, Output +

9V Battery

• Description: A battery providing 9V power supply.
• Pins: -, +

Wiring Details

Arduino UNO

• 5V: Connected to VCC of Module LDR, vcc of Servo, and Input + of 2Pin Push Switch.
• GND: Connected to GND of Servo, GND of Module LDR, and - of 9V Battery.
• Vin: Connected to + of 9V Battery.
• D9: Connected to pulse of Servo.
• D8: Connected to DO of Module LDR.
• D2: Connected to Output + of 2Pin Push Switch.

Servo

• vcc: Connected to 5V of Arduino UNO.
• gnd: Connected to GND of Arduino UNO.
• pulse: Connected to D9 of Arduino UNO.

Module LDR

• VCC: Connected to 5V of Arduino UNO.
• GND: Connected to GND of Arduino UNO.
• DO: Connected to D8 of Arduino UNO.

2Pin Push Switch

• Input +: Connected to 5V of Arduino UNO.
• Output +: Connected to D2 of Arduino UNO.

9V Battery

• -: Connected to GND of Arduino UNO.
• +: Connected to Vin of Arduino UNO.

Documented Code

Arduino UNO Code (sketch.ino)

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Additional Documentation (documentation.txt)

This documentation provides a comprehensive overview of the circuit, including a summary, detailed component list, wiring details, and the code used in the Arduino UNO microcontroller.