Circuit Documentation
Summary
This circuit consists of an Arduino UNO microcontroller, two IR sensors, and a Buzzer Module. The IR sensors detect objects and send signals to the Arduino, which then controls the Buzzer Module to produce sound based on the sensor inputs.
Component List
Arduino UNO
- Description: A microcontroller board based on the ATmega328P.
- Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0
IR Sensor 1
- Description: An infrared sensor used for object detection.
- Pins: out, gnd, vcc
IR Sensor 2
- Description: An infrared sensor used for object detection.
- Pins: out, gnd, vcc
Buzzer Module
- Description: A module that produces sound when activated.
- Pins: GND, Vcc, I/O
Wiring Details
Arduino UNO
- D7: Connected to IR Sensor 1 (out)
- GND: Connected to IR Sensor 1 (gnd), IR Sensor 2 (gnd), Buzzer Module (GND)
- 5V: Connected to IR Sensor 1 (vcc), IR Sensor 2 (vcc), Buzzer Module (Vcc)
- D4: Connected to Buzzer Module (I/O)
- D2: Connected to IR Sensor 2 (out)
IR Sensor 1
- out: Connected to Arduino UNO (D7)
- gnd: Connected to Arduino UNO (GND)
- vcc: Connected to Arduino UNO (5V)
IR Sensor 2
- out: Connected to Arduino UNO (D2)
- gnd: Connected to Arduino UNO (GND)
- vcc: Connected to Arduino UNO (5V)
Buzzer Module
- GND: Connected to Arduino UNO (GND)
- Vcc: Connected to Arduino UNO (5V)
- I/O: Connected to Arduino UNO (D4)
Documented Code
Arduino UNO Code (sketch.ino)
void setup() {
// put your setup code here, to run once:
}
void loop() {
// put your main code here, to run repeatedly:
}
Additional Documentation (documentation.txt)
This document provides a comprehensive overview of the circuit, including a summary, detailed component list, wiring details, and the code used in the Arduino UNO microcontroller.