Circuit Documentation

Summary of the Circuit

This circuit is designed to control two Mini Diaphragm Water Pumps using a 12V 7Ah battery and a Rocker Switch. The battery provides the power source for the pumps, and the Rocker Switch is used to turn the pumps on and off. The water pumps are expected to be connected to a water tank and nozzles, although these parts do not have direct electrical connections in the circuit.

Component List

Mini Diaphragm Water Pump

• Description: A pump used for moving water.
• Pins:
  • Positive (+)
  • Negative (-)

12v 7ah Battery

• Description: A rechargeable battery providing a 12V power source.
• Pins:
  • 12v +
  • 12v -

Rocker Switch

• Description: A switch to control the power flow to the water pumps.
• Pins:
  • 1
  • 2

Water Tank

• Description: A container for storing water to be pumped. It does not have electrical connections.

Nozzle

• Description: A device used to control the direction or characteristics of a fluid flow as it exits an enclosed chamber or pipe. It does not have electrical connections.

Wiring Details

Mini Diaphragm Water Pump

• Positive (+): Connected to the 12v + pin of the 12v 7ah Battery.
• Negative (-): Connected to pin 1 of the Rocker Switch.

12v 7ah Battery

• 12v +: Connected to the Positive (+) pins of both Mini Diaphragm Water Pumps.
• 12v -: Connected to pin 2 of the Rocker Switch.

Rocker Switch

• Pin 1: Connected to the Negative (-) pins of both Mini Diaphragm Water Pumps.
• Pin 2: Connected to the 12v - pin of the 12v 7ah Battery.

Documented Code

There is no embedded code provided for any microcontrollers in this circuit. Therefore, this section is not applicable.

---

This documentation provides an overview of the circuit, including the purpose and connections of each component. The absence of code indicates that the circuit's operation is purely electrical and does not involve any programmable logic controllers or microcontrollers.