Circuit Documentation
Summary of the Circuit
The circuit in question appears to be a simple control circuit for a water pump, which is activated by a reed switch. The reed switch is likely used as a sensor to detect the presence of a magnetic field, which could be indicative of a certain condition, such as a water level reaching a predefined threshold. When the reed switch is activated, it allows current to flow to the water pump, turning it on. The DC female jack provides power to the circuit.
Component List
DC Female Jack
- Description: A connector for a DC power supply.
- Pins:
- Negative
- Plug Detect
- Positive
Reed Switch
- Description: A magnetic field-activated switch.
- Pins:
- Pin 1
- Pin 2
Water Pump
- Description: An electromechanical device for moving water.
- Pins:
- VCC (Power Supply)
- GND (Ground)
Comments and Logo
- Description: Non-electrical components used for documentation or branding purposes. These components do not have pins and are not part of the electrical functionality of the circuit.
Wiring Details
DC Female Jack
- Negative is connected to the GND of the Water Pump.
- Positive is connected to Pin 1 of the Reed Switch.
Reed Switch
- Pin 1 is connected to the Positive of the DC Female Jack.
- Pin 2 is connected to the VCC of the Water Pump.
Water Pump
- VCC is connected to Pin 2 of the Reed Switch.
- GND is connected to the Negative of the DC Female Jack.
Documented Code
There is no code provided for any microcontrollers in this circuit. If a microcontroller is added in the future, the code will be documented in this section.