Circuit Documentation

Summary

This document provides a detailed overview of a simple circuit consisting of an Arduino UNO microcontroller and a red LED. The LED is connected to the Arduino UNO, allowing it to be controlled via the microcontroller's digital output pin.

Component List

Arduino UNO

• Description: A popular microcontroller board based on the ATmega328P.
• Pins: UNUSED, IOREF, Reset, 3.3V, 5V, GND, Vin, A0, A1, A2, A3, A4, A5, SCL, SDA, AREF, D13, D12, D11, D10, D9, D8, D7, D6, D5, D4, D3, D2, D1, D0

LED: Two Pin (red)

• Description: A standard red LED with two pins: anode and cathode.
• Pins: cathode, anode

Wiring Details

Arduino UNO

• GND: Connected to the cathode of the LED.
• D10: Connected to the anode of the LED.

LED: Two Pin (red)

• cathode: Connected to the GND pin of the Arduino UNO.
• anode: Connected to the D10 pin of the Arduino UNO.

Code Documentation

Arduino UNO Code

sketch.ino

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

documentation.txt

This document provides a comprehensive overview of the circuit, including the components used, their connections, and the code running on the Arduino UNO.