Circuit Documentation

Summary of the Circuit

This circuit appears to be a simple LED control circuit that uses a potentiometer to adjust the brightness of the LED, a rocker switch to turn the LED on and off, and a resistor to limit the current through the LED. The circuit is powered by a 9V battery. There is no microcontroller or embedded code involved in this circuit.

Component List

Potentiometer

• Description: A variable resistor with three terminals.
• Pins: GND, Output, VCC

Rocker Switch

• Description: A switch with a seesaw action to open or close the circuit.
• Pins: 1, 2

9V Battery

• Description: A standard 9-volt battery.
• Pins: -, +

LED: Two Pin (white)

• Description: A white light-emitting diode with two terminals.
• Pins: cathode, anode

Resistor

• Description: A passive two-terminal electrical component that implements electrical resistance as a circuit element.
• Pins: pin1, pin2
• Properties: Resistance: 100 Ohms

Wiring Details

Potentiometer

• GND is connected to Rocker Switch pin 2.
• Output is connected to Resistor pin1.
• VCC is not connected in the provided net list.

Rocker Switch

• Pin 1 is connected to the 9V Battery + terminal.
• Pin 2 is connected to the Potentiometer GND.

9V Battery

• + terminal is connected to Rocker Switch pin 1.
• - terminal is connected to LED cathode.

LED: Two Pin (white)

• Cathode is connected to the 9V Battery - terminal.
• Anode is connected to Resistor pin2.

Resistor

• Pin1 is connected to Potentiometer Output.
• Pin2 is connected to LED anode.

Documented Code

Since there is no microcontroller or embedded code provided for this circuit, this section is not applicable.