Circuit Documentation

Summary

This document provides a detailed overview of a circuit that includes an Arduino Nano microcontroller, various LEDs, a buzzer, resistors, a relay module, and an AC bulb. The circuit is designed to control the LEDs, buzzer, and AC bulb using the Arduino Nano.

Component List

1. D7S

   • Description: Not provided
   • Purpose: Not provided

2. Arduino Nano

   • Description: Not provided
   • Purpose: Not provided
   • Pins: D1/TX, D0/RX, RESET, GND, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11/MOSI, D12/MISO, VIN, 5V, A7, A6, A5, A4, A3, A2, A1, A0, AREF, 3V3, D13/SCK

3. Buzzer

   • Description: Not provided
   • Purpose: Not provided
   • Pins: PIN, GND

4. LED: Two Pin (yellow)

   • Description: Not provided
   • Purpose: Not provided
   • Pins: cathode, anode

5. LED: Two Pin (blue)

   • Description: Not provided
   • Purpose: Not provided
   • Pins: cathode, anode

6. LED: Two Pin (orange)

   • Description: Not provided
   • Purpose: Not provided
   • Pins: cathode, anode

7. AC Bulb

   • Description: Not provided
   • Purpose: Not provided
   • Pins: P, N

8. LED: Two Pin (white)

   • Description: Not provided
   • Purpose: Not provided
   • Pins: cathode, anode

9. 1 Channel 5V Relay Module

   • Description: Not provided
   • Purpose: Not provided
   • Pins: VCC+, VCC- (GND), IN, N.O., COM, N.C.

10. LED: Two Pin (green)

    • Description: Not provided
    • Purpose: Not provided
    • Pins: cathode, anode

11. LED: Two Pin (red)

    • Description: Not provided
    • Purpose: Not provided
    • Pins: cathode, anode

12. AC Supply

    • Description: Not provided
    • Purpose: Not provided
    • Pins: +ve, -ve

13. Resistor (10k Ohms)

    • Description: Not provided
    • Purpose: Not provided
    • Pins: pin1, pin2
    • Properties: Resistance = 10k Ohms

14. Resistor (10k Ohms)

    • Description: Not provided
    • Purpose: Not provided
    • Pins: pin1, pin2
    • Properties: Resistance = 10k Ohms

Wiring Details

D7S

• Connected to:
  • Resistor pin1 (10k Ohms)
  • Resistor pin1 (10k Ohms)
  • Resistor pin2 (10k Ohms)
  • Resistor pin2 (10k Ohms)
  • LED: Two Pin (green) cathode
  • LED: Two Pin (yellow) cathode
  • LED: Two Pin (white) cathode
  • LED: Two Pin (orange) cathode
  • LED: Two Pin (red) cathode
  • LED: Two Pin (blue) cathode
  • Buzzer PIN
  • Arduino Nano GND
  • 1 Channel 5V Relay Module VCC- (GND)

Arduino Nano

• Connected to:
  • A5: Resistor pin2 (10k Ohms)
  • A4: Resistor pin2 (10k Ohms)
  • GND: D7S, LED: Two Pin (green) cathode, LED: Two Pin (yellow) cathode, LED: Two Pin (white) cathode, LED: Two Pin (orange) cathode, LED: Two Pin (red) cathode, LED: Two Pin (blue) cathode, Buzzer PIN, 1 Channel 5V Relay Module VCC- (GND)
  • D2: LED: Two Pin (green) anode
  • D3: LED: Two Pin (yellow) anode
  • D4: LED: Two Pin (orange) anode
  • D5: LED: Two Pin (blue) anode
  • D6: LED: Two Pin (red) anode
  • D7: Buzzer GND
  • D8: LED: Two Pin (white) anode
  • D9: 1 Channel 5V Relay Module IN
  • 5V: 1 Channel 5V Relay Module VCC+

Buzzer

• Connected to:
  • PIN: D7S
  • GND: Arduino Nano D7

LED: Two Pin (yellow)

• Connected to:
  • cathode: D7S
  • anode: Arduino Nano D3

LED: Two Pin (blue)

• Connected to:
  • cathode: D7S
  • anode: Arduino Nano D5

LED: Two Pin (orange)

• Connected to:
  • cathode: D7S
  • anode: Arduino Nano D4

AC Bulb

• Connected to:
  • P: AC Supply +ve
  • N: 1 Channel 5V Relay Module COM

LED: Two Pin (white)

• Connected to:
  • cathode: D7S
  • anode: Arduino Nano D8

1 Channel 5V Relay Module

• Connected to:
  • VCC+: Arduino Nano 5V
  • VCC- (GND): D7S, Arduino Nano GND
  • IN: Arduino Nano D9
  • N.O.: AC Supply -ve
  • COM: AC Bulb N

LED: Two Pin (green)

• Connected to:
  • cathode: D7S
  • anode: Arduino Nano D2

LED: Two Pin (red)

• Connected to:
  • cathode: D7S
  • anode: Arduino Nano D6

AC Supply

• Connected to:
  • +ve: AC Bulb P
  • -ve: 1 Channel 5V Relay Module N.O.

Resistor (10k Ohms)

• Connected to:
  • pin1: D7S
  • pin2: Arduino Nano A5

Resistor (10k Ohms)

• Connected to:
  • pin1: D7S
  • pin2: Arduino Nano A4

Documented Code

Arduino Nano Code (sketch.ino)

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Documentation (documentation.txt)

This document provides a comprehensive overview of the circuit, including the components used, their connections, and the code for the Arduino Nano microcontroller.