Circuit Documentation

Summary

This circuit consists of an Arduino Mega 2560 microcontroller and a Servo motor. The Arduino Mega 2560 is used to control the Servo motor by sending PWM signals. The Servo motor is powered by the 5V supply from the Arduino and shares a common ground.

Component List

Arduino Mega 2560

• Description: A microcontroller board based on the ATmega2560.
• Pins: IOREF, RESET, 3V3, 5V, GND, VIN, A0, A1, A2, A3, A4, A5, A6, A7, A8, A9, A10, A11, A12, A13, A14, A15, D21/SCL, D20/SDA, D19/RX1, D18/TX1, D17 PWM/RX2, D16 PWM/TX2, D15/RX3, D14/TX3, D0 RX0, D1 TX0, D2 PWM, D3 PWM, D4 PWM, D5 PWM, D6 PWM, D7 PWM, D8 PWM, D9 PWM, D10 PWM, D11 PWM, D12 PWM, D13 PWM, AREF, SDA, SCL, D52, D50, D48, D46, D44, D42, D40, D38, D36, D34, D32, D30, D28, D26, D24, D22, D53, D51, D49, D47, D45, D43, D41, D39, D37, D35, D33, D31, D29, D27, D25, D23, 6swdw

Servo

• Description: A standard servo motor.
• Pins: GND, VCC, PWM

Wiring Details

Arduino Mega 2560

• GND: Connected to Servo GND
• 5V: Connected to Servo VCC
• D9 PWM: Connected to Servo PWM

Servo

• GND: Connected to Arduino Mega 2560 GND
• VCC: Connected to Arduino Mega 2560 5V
• PWM: Connected to Arduino Mega 2560 D9 PWM

Code Documentation

Arduino Mega 2560 Code

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Additional Documentation

This documentation provides a comprehensive overview of the circuit, including a summary, detailed component list, wiring details, and the code used for the Arduino Mega 2560.