Circuit Documentation

Summary of the Circuit

This circuit integrates a DHT11 temperature and humidity sensor with an ESP8266 NodeMCU microcontroller. The purpose of the circuit is to measure environmental data using the DHT11 sensor and process this data with the ESP8266 NodeMCU, which can then be used for various applications such as home automation, weather monitoring, or IoT projects. The ESP8266 NodeMCU provides WiFi connectivity, which allows the sensor data to be transmitted wirelessly to a server or cloud service for further analysis or monitoring.

Component List

DHT11 Temperature and Humidity Sensor

• Pins: DATA, GND, VCC
• Description: The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and outputs a digital signal on the DATA pin.

ESP8266 NodeMCU Microcontroller

• Pins: D0, D1, D2, D3, D4, 3V3, GND, D5, D6, D7, D8, RX, TX, A0, RSV, SD3, SD2, SD1, CMD, SD0, CLK, EN, RST, VIN
• Description: The ESP8266 NodeMCU is an open-source Lua based firmware and development board specially designed for IoT applications. It features WiFi connectivity and a variety of digital and analog pins for interfacing with different sensors and actuators.

Wiring Details

DHT11 Temperature and Humidity Sensor

• DATA: Connected to ESP8266 NodeMCU pin D4
• GND: Connected to ESP8266 NodeMCU pin GND
• VCC: Connected to ESP8266 NodeMCU pin 3V3

ESP8266 NodeMCU Microcontroller

• D4: Connected to DHT11 DATA pin
• GND: Connected to DHT11 GND pin
• 3V3: Connected to DHT11 VCC pin

Documented Code

No code has been provided for the microcontroller. To fully utilize the circuit, embedded code should be written and uploaded to the ESP8266 NodeMCU to initialize the WiFi module, read data from the DHT11 sensor, and transmit the data to a server or cloud service. The code should include proper initialization of the DHT11 sensor, reading of temperature and humidity values, and error handling for any communication issues between the sensor and the microcontroller.