Circuit Documentation

Summary

This circuit consists of a power source, pushbuttons, resistors, a capacitor, a transistor, and an LED. The circuit is designed to control the LED using the pushbuttons and the transistor, with various resistors and a capacitor to manage current and voltage levels.

Component List

1. 2x 18650 Battery Pack

   • Pins: VCC, GND
   • Description: Provides power to the circuit.

2. Pushbutton (1)

   • Pins: Pin 1 (in), Pin 2 (in), Pin 3 (out), Pin 4 (out)
   • Description: Used to control the circuit.

3. Pushbutton (2)

   • Pins: Pin 1 (in), Pin 2 (in), Pin 3 (out), Pin 4 (out)
   • Description: Used to control the circuit.

4. Resistor (10 Ohms) (1)

   • Pins: pin1, pin2
   • Description: Limits current in the circuit.

5. Resistor (10 Ohms) (2)

   • Pins: pin1, pin2
   • Description: Limits current in the circuit.

6. Resistor (220 Ohms)

   • Pins: pin1, pin2
   • Description: Limits current in the circuit.

7. Resistor (10k Ohms)

   • Pins: pin1, pin2
   • Description: Limits current in the circuit.

8. Electrolytic Capacitor (0.00047 Farads)

   • Pins: +, -
   • Description: Stabilizes voltage in the circuit.

9. NPN Transistor (EBC)

   • Pins: emitter, base, collector
   • Description: Acts as a switch or amplifier in the circuit.

10. LED: Two Pin (red)

    • Pins: anode, cathode
    • Description: Emits light when current flows through it.

Wiring Details

2x 18650 Battery Pack

• VCC is connected to:

  • Pin 2 (in) of Pushbutton (2)
  • Anode of LED

• GND is connected to:

  • • of Electrolytic Capacitor
  • Pin 4 (out) of Pushbutton (1)
  • Emitter of NPN Transistor

Pushbutton (1)

• Pin 1 (in) is connected to:

  • • of Electrolytic Capacitor
  • pin2 of Resistor (10k Ohms)
  • pin1 of Resistor (10 Ohms) (1)

• Pin 2 (in) is connected to:

  • VCC of 2x 18650 Battery Pack

• Pin 3 (out) is connected to:

  • pin1 of Resistor (10k Ohms)

• Pin 4 (out) is connected to:

  • GND of 2x 18650 Battery Pack

Pushbutton (2)

• Pin 1 (in) is connected to:

  • • of Electrolytic Capacitor
  • pin2 of Resistor (10k Ohms)
  • pin1 of Resistor (10 Ohms) (1)

• Pin 2 (in) is connected to:

  • VCC of 2x 18650 Battery Pack

• Pin 3 (out) is connected to:

  • pin1 of Resistor (10k Ohms)

• Pin 4 (out) is connected to:

  • GND of 2x 18650 Battery Pack

Resistor (10 Ohms) (1)

• pin1 is connected to:

  • Pin 1 (in) of Pushbutton (1)
  • • of Electrolytic Capacitor
  • pin2 of Resistor (10k Ohms)

• pin2 is connected to:

  • Base of NPN Transistor

Resistor (10 Ohms) (2)

• pin1 is connected to:

  • pin2 of Resistor (220 Ohms)

• pin2 is connected to:

  • Cathode of LED

Resistor (220 Ohms)

• pin1 is connected to:

  • Collector of NPN Transistor

• pin2 is connected to:

  • pin1 of Resistor (10 Ohms) (2)

Resistor (10k Ohms)

• pin1 is connected to:

  • Pin 3 (out) of Pushbutton (2)

• pin2 is connected to:

  • • of Electrolytic Capacitor
  • Pin 1 (in) of Pushbutton (1)
  • pin1 of Resistor (10 Ohms) (1)

Electrolytic Capacitor (0.00047 Farads)

• + is connected to:

  • pin2 of Resistor (10k Ohms)
  • Pin 1 (in) of Pushbutton (1)
  • pin1 of Resistor (10 Ohms) (1)

• - is connected to:

  • GND of 2x 18650 Battery Pack

NPN Transistor (EBC)

• Emitter is connected to:

  • GND of 2x 18650 Battery Pack

• Base is connected to:

  • pin2 of Resistor (10 Ohms) (1)

• Collector is connected to:

  • pin1 of Resistor (220 Ohms)

LED: Two Pin (red)

• Anode is connected to:

  • VCC of 2x 18650 Battery Pack

• Cathode is connected to:

  • pin2 of Resistor (10 Ohms) (2)

Code

No microcontroller code is provided for this circuit.