Circuit Documentation
Summary of the Circuit
This circuit appears to be a simple power distribution system that supplies power to various components including a mini diaphragm water pump, an RGB LED, and a fan. The power is provided by a 12V 5A power supply, which is capable of converting 220V AC to 12V-24V DC. The circuit uses JST PH 2.0 connectors for making detachable connections to the fan and the water pump. The ground connections of all components are tied together, and the positive supply from the power supply is distributed to the RGB LED and presumably to other components through the connectors.
Component List
Mini Diaphragm Water Pump
- Description: A pump used for moving water.
- Pins: Positive (+), Negative (-)
POWER SUPPLY 12V 5AMP
- Description: Converts 220V AC to 12V-24V DC.
- Pins: 220V Positive Pole (AC), 220V Negative Pole (AC), GND, GND (DC), 12V-24V Output (DC)
RGB LED
- Description: A light-emitting diode that can emit red, green, or blue light.
- Pins: g (green), v (common anode), s (source)
Fan
- Description: A device used to create airflow.
- Pins: GND, 5V
Water Pump
- Description: A pump used for moving water.
- Pins: VCC, GND
JST PH 2.0 Connectors (x2)
- Description: Connectors used for making detachable connections.
- Pins: 1, 2
Wiring Details
Mini Diaphragm Water Pump
- Positive (+): Not specified in the net list.
- Negative (-): Connected to the common ground net.
POWER SUPPLY 12V 5AMP
- 220V Positive Pole (AC): Not specified in the net list.
- 220V Negative Pole (AC): Not specified in the net list.
- GND: Connected to the common ground net.
- GND (DC): Not specified in the net list.
- 12V-24V Output (DC): Connected to the positive supply net.
RGB LED
- g (green): Connected to the positive supply net.
- v (common anode): Connected to the common ground net.
- s (source): Not specified in the net list.
Fan
- GND: Connected to the common ground net.
- 5V: Not specified in the net list.
Water Pump
- VCC: Not specified in the net list.
- GND: Connected to the common ground net.
JST PH 2.0 Connector #1
- 1: Connected to the common ground net.
- 2: Connected to the positive supply net.
JST PH 2.0 Connector #2
- 1: Connected to the common ground net.
- 2: Connected to the positive supply net.
Documented Code
No code has been provided for any microcontrollers in the circuit. Therefore, there is no embedded code to document at this time.