Cirkit Designer LogoCirkit DesignerYour all-in-one circuit design IDE Launch Cirkit Designer App

Raspberry Pi 4B-Based GPS and GSM Tracking System with Audio Feedback

View and Edit Project In Cirkit DesignerImage of Raspberry Pi 4B-Based GPS and GSM Tracking System with Audio Feedback

Circuit Documentation

Summary

This circuit integrates a GPS module, a Raspberry Pi 4B, an Adafruit FONA 808 Shield, a digital audio amplifier, a condenser microphone, a voltage regulator, a 12V battery, and a speaker to create a multifunctional system. The Raspberry Pi 4B serves as the central processing unit, interfacing with the GPS module for location tracking and the FONA 808 Shield for cellular communication. The digital audio amplifier and speaker are used for audio output, and the condenser microphone provides audio input capability. The voltage regulator steps down the 12V battery voltage to 5V and 3V required by the other components.

Component List

Wiring Details

GPS NEO-6M V2

Raspberry Pi 4B

Adafruit FONA 808 Shield

PAM8406 5V Digital Audio Amplifier

Condenser Microphone

Voltage Regulator 12V to 5V 3V

Battery 12V

Adafruit STEMMA Speaker

Documented Code

GPS NEO-6M V2 Code

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Raspberry Pi 4B Code

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Note: The actual implementation of the code for the Raspberry Pi 4B would typically be in a language like Python or C++, and not in Arduino sketch format. The provided code is a placeholder and should be replaced with the actual code that initializes and controls the hardware interfaces for the GPS module, FONA 808 Shield, audio amplifier, and microphone.