Cirkit Designer LogoCirkit DesignerYour all-in-one circuit design IDE Launch Cirkit Designer App

Raspberry Pi 4B-Based Environmental Monitoring System with Soil Moisture Sensing and GPS Tracking

View and Edit Project In Cirkit DesignerImage of Raspberry Pi 4B-Based Environmental Monitoring System with Soil Moisture Sensing and GPS Tracking

Circuit Documentation

Summary

The circuit in question is designed to interface a Raspberry Pi 4B with a variety of sensors and actuators, including a SparkFun Soil Moisture Sensor, an IR sensor, a GPS NEO 6M module, and a Servomotor SG90. The Raspberry Pi 4B serves as the central processing unit, controlling and communicating with the connected devices. The soil moisture sensor is used to measure the water content in the soil, the IR sensor for detecting objects or movements, the GPS module for obtaining geographical location, and the servomotor for actuating movements.

Component List

SparkFun Soil Moisture Sensor

Raspberry Pi 4B

IR Sensor

GPS NEO 6M

Servomotor SG90

Wiring Details

SparkFun Soil Moisture Sensor

Raspberry Pi 4B

IR Sensor

GPS NEO 6M

Servomotor SG90

Documented Code

IR Sensor Microcontroller Code (sketch.ino)

void setup() {
  // put your setup code here, to run once:

}

void loop() {
  // put your main code here, to run repeatedly:

}

Note: The provided code for the IR sensor microcontroller is a template with empty setup and loop functions. This code needs to be populated with the logic for initializing the sensor and handling the data in the loop function.

Additional Documentation (documentation.txt)

No additional documentation was provided for the IR sensor microcontroller.

End of Documentation