Circuit Documentation
Summary of the Circuit
The circuit described by the provided inputs appears to be designed to power an electric fence using a high-voltage generator, with a 9V battery as the power source. The circuit includes a rocker switch to control power flow, diodes for current direction control, a resistor to limit current, and an LED as an indicator. The high-voltage generator is presumably used to step up the voltage to a level suitable for the electric fence.
Component List
High Voltage Generator 400KV
- Description: A device that steps up the input voltage to a high voltage output, typically used for applications like electric fences.
- Pins: out 1, out 2, - Negative, Positive
Battery 9V
- Description: A standard 9-volt battery used as the power source for the circuit.
- Pins: VCC, GND
Rocker Switch
- Description: A switch used to control the power flow from the battery to the rest of the circuit.
- Pins: 1, 2
Diodes
- Description: Semiconductor devices that allow current to flow in one direction only, used to protect components from reverse current.
- Pins: cathode, anode
LED: Two Pin (red)
- Description: A red light-emitting diode used as an indicator light.
- Pins: cathode, anode
Resistor
- Description: A passive electrical component with a specific resistance value, used to limit the current in the circuit.
- Pins: pin1, pin2
- Properties: Resistance: 68 Ohms
Electric Fence
- Description: The load in the circuit, which is the electric fence itself.
- Pins: (No explicit pins, connection implied)
Comments
- Description: Comments are non-electrical components used for documentation purposes within the circuit design.
Logo
- Description: A graphical representation or logo, non-functional in terms of circuit operation.
Wiring Details
High Voltage Generator 400KV
- out 1 connected to the electric fence
- out 2 connected to the electric fence
- - Negative connected to the anode of Diode (instance 47904d02) and pin2 of Resistor
- Positive connected to the cathode of Diode (instance 13225a2d) and cathode of LED: Two Pin (red)
Battery 9V
- VCC connected to pin 1 of Rocker Switch
- GND connected to the cathode of Diode (instance 47904d02)
Rocker Switch
- 1 connected to VCC of Battery 9V
- 2 connected to the anode of Diode (instance 13225a2d)
Diodes
- Anode (instance 47904d02) connected to pin2 of Resistor and - Negative of High Voltage Generator 400KV
- Cathode (instance 47904d02) connected to GND of Battery 9V
- Anode (instance 13225a2d) connected to pin 2 of Rocker Switch
- Cathode (instance 13225a2d) connected to Positive of High Voltage Generator 400KV and cathode of LED: Two Pin (red)
LED: Two Pin (red)
- Anode connected to pin1 of Resistor
- Cathode connected to Positive of High Voltage Generator 400KV and cathode of Diode (instance 13225a2d)
Resistor
- Pin1 connected to anode of LED: Two Pin (red)
- Pin2 connected to anode of Diode (instance 47904d02) and - Negative of High Voltage Generator 400KV
Electric Fence
- Connected to out 1 and out 2 of High Voltage Generator 400KV
Documented Code
No code has been provided for any microcontrollers in the circuit. If the circuit is later updated to include a microcontroller, the code will be documented in this section.